A very sick RR Evoque

A very sick RR Evoque

Author
Discussion

steve_jones_70

Original Poster:

3 posts

48 months

Tuesday 29th March 2022
quotequote all
Hi All

New to this forum, wanted to say hi to everyone.

I've owned a RR Evoque 2016 manual 2.0 Diesel since last July. I work in healthcare and due to constantly working through Covid I felt like I wanted to buy my dream car. Sadly Ive had nothing but problems with this car. The first 3 months were perfect and by far the best car I've ever owned however since then it has required a new intercooler, new drivers door lock and to make things worse in September last year it required a new engine and turbo. RR wanted 18K to repair the engine and turbo which was more than the car. So off it went to an engine rebuilt specialist. The car was returned in November and it has been ok since then.

However what has happened now is the car keeps cutting out when the engine gets hot. So I can drive it for a while, maybe 20 or 30 minutes then all of a sudden it will cut out, the car wont move and the engine warning lights come on. Once the engine cools down I can drive it again. These are the fault codes it is showing me:

P06A6-1C - Sensor reference voltage A circuit range/performance - Intermittent
P0642-00 - Sensor reference voltage A circuit low - Intermittent
P0405-16 - Exhaust Gas Recirculation (EGR) sensor A circuit low - History
P26D4-16 - Variable coolant pump - supply voltage - circuit low - Intermittent
P0107-16 - Manifold Absolute Pressure (MAP)/barometric pressure sensor input low
P2138-00 - Throttle/pedal position sensor/switch D/E voltage correlation

Has anyone come across this before and if anyone can offer any advice it would be greatly appreciated.

clarkey

1,366 posts

285 months

Tuesday 29th March 2022
quotequote all
It might just need a new battery. My Discovery used to report all sorts of odd faults with a weak battery.

spitfire-ian

3,847 posts

229 months

Tuesday 29th March 2022
quotequote all
I'd say with all those faults mentioning voltage that a new battery would be the starting point.

Zippee

13,487 posts

235 months

Tuesday 29th March 2022
quotequote all
Agreed on the battery front. We had a number of similar issues and they all disappeared when the battery was replaced.
Sorry to hear about your issues though. We've had a 2014 since new and it has been faultless over the last 70k miles.

Alex_225

6,304 posts

202 months

Tuesday 29th March 2022
quotequote all
Not the same car but my 08 S Class threw up a load of errors when I was checking something else on the code reader. All of which were the result of the battery getting low, it's been on trickle now and I cleared the errors and so far they haven't returned.

Pistonheader101

2,206 posts

108 months

Tuesday 29th March 2022
quotequote all
battery most likely as others have said.


just curious what the engine rebuild cost was.

Monkeylegend

26,530 posts

232 months

Tuesday 29th March 2022
quotequote all
Had the exact same issue on my Merc SL and a new crank position sensor sorted it for a very reasonable cost.

Assuming yours has one of course.

steve_jones_70

Original Poster:

3 posts

48 months

Tuesday 29th March 2022
quotequote all
Thanks for all the replies, really appreciate it.

Hopefully its just something simple.

The engine and turbo was re build for £8000. Luckily I took out a 3 year warranty and they paid out on the rebuild.

Bobupndown

1,864 posts

44 months

Sunday 3rd April 2022
quotequote all
Ingenium strikes again!

Mikebentley

6,176 posts

141 months

Sunday 3rd April 2022
quotequote all
That warranty needs naming……they are not supposed to pay out it’s against forum rules.

Zippee

13,487 posts

235 months

Sunday 3rd April 2022
quotequote all
Bobupndown said:
Ingenium strikes again!
OP's car is 2016, ingenium was 2018


steve_jones_70

Original Poster:

3 posts

48 months

Friday 8th April 2022
quotequote all
It's the 2.0 Ingenium engine. Full service history, I purchased in July 20 and the engine went in September 21, the car had been serviced twice in those 14 months.

When I spoke to RR and asked why the engine had gone at 75k there response was engines can fail at any time for any reason. Kind of sums them up.


Bobupndown

1,864 posts

44 months

Sunday 10th April 2022
quotequote all
Zippee said:
OP's car is 2016, ingenium was 2018
Older engine was 2.2 Sd4 as in late Freelander 2. No issues with them.
2.0 is Ingenium.
https://en.wikipedia.org/wiki/Ingenium_engine_fami...

davedavies

21 posts

202 months

Monday 19th September 2022
quotequote all
Has anyone any info on this actual issue please.
Mine is now doing the same - as much as I can but drawing a blank

Thanks


  1. steve_jones_70 said:
    Hi All
New to this forum, wanted to say hi to everyone.

I've owned a RR Evoque 2016 manual 2.0 Diesel since last July. I work in healthcare and due to constantly working through Covid I felt like I wanted to buy my dream car. Sadly Ive had nothing but problems with this car. The first 3 months were perfect and by far the best car I've ever owned however since then it has required a new intercooler, new drivers door lock and to make things worse in September last year it required a new engine and turbo. RR wanted 18K to repair the engine and turbo which was more than the car. So off it went to an engine rebuilt specialist. The car was returned in November and it has been ok since then.

However what has happened now is the car keeps cutting out when the engine gets hot. So I can drive it for a while, maybe 20 or 30 minutes then all of a sudden it will cut out, the car wont move and the engine warning lights come on. Once the engine cools down I can drive it again. These are the fault codes it is showing me:

P06A6-1C - Sensor reference voltage A circuit range/performance - Intermittent
P0642-00 - Sensor reference voltage A circuit low - Intermittent
P0405-16 - Exhaust Gas Recirculation (EGR) sensor A circuit low - History
P26D4-16 - Variable coolant pump - supply voltage - circuit low - Intermittent
P0107-16 - Manifold Absolute Pressure (MAP)/barometric pressure sensor input low
P2138-00 - Throttle/pedal position sensor/switch D/E voltage correlation

Has anyone come across this before and if anyone can offer any advice it would be greatly appreciated.

JaguarXE20

4 posts

1 month

Thursday 2nd May
quotequote all
Hi Steve,
Just wondering if you fixed the issue? I have the exact story but with my jaguar XE.
Thanks!
OP Posts Only