Flywheel Splash Plate / Bellhousing cover T5 Gearbox
Discussion
Hi, I've just collected my 95 Griff 500 and have a number of issues to resolve!
Today's is I have just noticed there is no cover plate over the Flywheel of the T5 gearbox (really bad pic below).
Having looked on the TVR Parts site they refer to P/N TVR Q0057 which they call a Flywheel Splash Plate it looks about the right shape but the fixing holes on the picture don't seem to be in the corresponding place on the gearbox housing.
Does anyone have any experience of this item?
I assume it didn't leave the factory like this and that the part has been left off after an engine out or similar?
Thanks
Matt
![](http://thumbsnap.com/sc/b0Px5yUY.jpg[/img]</a> <a href="http://thumbsnap.com/9f1uJHMT" Target="_blank">[img]http://thumbsnap.com/sc/9f1uJHMT.jpg)
Today's is I have just noticed there is no cover plate over the Flywheel of the T5 gearbox (really bad pic below).
Having looked on the TVR Parts site they refer to P/N TVR Q0057 which they call a Flywheel Splash Plate it looks about the right shape but the fixing holes on the picture don't seem to be in the corresponding place on the gearbox housing.
Does anyone have any experience of this item?
I assume it didn't leave the factory like this and that the part has been left off after an engine out or similar?
Thanks
Matt
Gassing Station | Griffith | Top of Page | What's New | My Stuff