Rattling Ripshifter
Discussion
Just to clarify, the rattle that sometimes occurs is actually the knob rattling on the steel shaft. This is all original parts that are retained even when a shifter is fitted. These knobs are fiited with a smear of silicone sealant when clipped on to prevent the plastic knob touching the steel part. Sadly this is not a great idea and is not always succesful. If this is the case fitting a rippy will highlight this as it is a more direct connection to the gearbox.
The knob can be reglued/siliconed on, but it is a serious pain the baclside to do.
The knob can be reglued/siliconed on, but it is a serious pain the baclside to do.
I can confirm that as the VE rippy comes with instructions to use silicon sealant on the nob to prevent this. Needless to say I didnt and she is a like a rattlesnake when accelerating. The VE console comes apart a little easier than the previous models so fixing this isnt so bad, aside from punching yourself in the face taking it off again.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff