wiring help needed!!!

im still stuck and i don't know how to get out of the hole im in lol! im trying to match up the 11 seperate spade connectors to the back of the light/indicators stalk side of the switch, my m12 is the second one ever built and noble don't have my wiring diagram on records, they have a wiring diagram but the colours do not match mine. im wondering if anybody knows what each pin has a purpose for and i can try and trace out wires, basically i need a ford expert! any help would be greatly appreciated

Thanks Lee
07709429445

Here's info from the electrical section (chapter 8)of the US build manual - hope it helps...

Connector	Pin	Function	Color	Size	Destination	Switch Pin
INT15A	1	Supply	Red	1.5	Fuse 15	Light 2
	2	Ignition supply	Black	1.0	Spliced to INT14C pin 4	Light 8
	3	Turn signal switch supply	Green/White	1.5	Fuse 13	Light 3
	4	Park light switch supply	Grey/Red	1.5	40A Maxi fuse	Light 6
INT15B	1	High beam	White	.75	Relay B pin 86	Light 9
	2	Low beam	Yellow	.75	Relay A pin 86	Light 11
	3	Ground	Brown	1.5	Central ground INT03	Light 4
	4	Park lights supply	Grey/Black	1.5	Fuses 1 and 2	Light 5
	5	Left turn	Green/Yellow	.75	RR14 pin 6	Light 1
	6	Right turn	Green/Black	.75	RR14 pin 7	Light 7
						Light 10 not used
INT16	1	Horn	Red/Yellow	1.5	Relay L pin 86	Wiper 1
	2	Intermittent wiper	Blue	1.5	INT02 pin 54	Wiper 2
	3	Intermittent wiper	Blue/White	1.5	INT02 pin 31b2	Wiper 3
	4	Wiper supply	Green/Purple	1.5	Fuse 10	Wiper 5
	5	Wiper high speed	Green/Yellow	1.5	FT09 pin 3	Wiper 7
	6	Wiper low speed	Green/Black	1.5	Relay J pin 87a	Wiper 9
	7	Washer	Green/Brown	.75	FT05 pin 1; Relay J pin 86	Wiper 8
	8	Wiper park signal	Green	1.5	INT02 pin 31b1; FT09 pin 4	Wiper 10
						Wiper 4, 6, 11 not used