Discussion
Calling Adrian.
Is there any solution for a lazy wiper motor?
I've stripped mine, cleaned everything, greased or oiled where required. Removed and greased the rack. But still the wipers stall on anything less that a wringing wet screen. Same/slightly better with the engine running so not low volts.
Help
Steve
Is there any solution for a lazy wiper motor?
I've stripped mine, cleaned everything, greased or oiled where required. Removed and greased the rack. But still the wipers stall on anything less that a wringing wet screen. Same/slightly better with the engine running so not low volts.
Help
Steve
Steve, I'm on taimarturbo@gmail.com, ...the 'NON' motor upgrade (yoke/armature/brush) which by moving the 1st speed brushes so that there is near as no difference between the 1st and 2nd speed is always going to be 'feel' quicker. I still offer replacing the gear for free on the upgrades where they sheer the teeth because of the upgrade torque start-up speed, or when they are built to run in reverse by the fitters. The upgrade does not deal with any issue with any part of the gearbox/rack/park switch. A@
Edited by Adrian@ on Monday 22 April 07:07
Gassing Station | Chimaera | Top of Page | What's New | My Stuff