Nissan 300ZX Twin Turbo - 547bhp

Finally selling my car after 9yrs of ownership. This is one of the original SE Nissan 300zx’s and even featured in their parts catalogue (scanned copies provided with sale). The car has also appeared in a Max Power DVD as a feature car (‘Max Power: Hardcore Tarmac Terrorists’) whilst owned by a previous owner.

The car is in very good mechanical condition with Jimmer at PowerZed giving it the all clear following a visual inspection and a check on ConZult. All mechanical work worth mention has been completed by PowerZed. All bodywork since I’ve owned it has been carried out by Custom Exotics. A lot of money and time has been spent on the car, some details below with more available on request. I have full records of all work carried out with all receipts, etc.

The car has been mapped on a dyno and has a proven 547fwhp at 19psi with 508ft lbs. I’ve listed as much as I can below. More details are available on request.

MOT valid til 25 Jan 2017

Tax is no longer transferrable - new owner will need to tax to drive away

Mileage 149k miles (full engine rebuild at 132k miles)

Engine - PowerZed Build done at approx 132k miles so new engine has only covered 17k miles

87.5 Wiseco pistons

Cometic head gaskets

ACL crank bearings

Z1 GT535r hybrid turbos and divorces downpipes

Nismo 555c injectors

NGK Platinum spark plugs

AMS High Flow cast exhaust manifolds

New Rhd EFI engine loom

Plenum stripped and painted in Dark Candy Apple Red

…more details available on request

Red Autobahn88 siicone intake hoses

Blitz DSBC Boost Controller

SE stainless steel exhaust system

Series 2 PTU

K&N Hi-Flow Air Filter

PACE Side-mount intercoolers & silicone hoses

Aluminium lower radiator hose

Custom Osty aluminium with CF effect slam panels - 3pc

Duracell DA70 Advanced car battery

Drivetrain & Cooling

Automatic to Manual conversion at same time as engine rebuilt (132k miles)

RPS Max Street Clutch (<600 miles)

Z1 Lightened Flywheel

Suspension

MeisterR Zeta-R Coilovers

Driftworks HICAS Elimination

Cyberspeeds Front & Rear Camber Arms

Cyberspeeds Rear Traction Rods

Cyberspeeds Front Tension Rod

Stillen front and rear sway bars

Brakes & Wheels

R33 Brembo front and rear brake caliper upgrade - custom red with black lettering

EBC Red Stuff brake pads

Front SE AP 330mm brake disc upgrade

Stainless steel braided brake hoses

18” Antera 143 alloy wheels

Pirelli P-Zero tyres on rear (<1k miles)

Continental ContiSport Contact 3 tyres on front

H&R 15mm spacers on rear

Bodywork

Silvia Engineering bodykit consisting of SE Monza nose cone, SE Monza front bumper, SE Monza rear bumper, SE Monza vented bonnet abd SE Monza rear wing

Silvia Engineering custom brake ducting from under front bumper to front brakes

Car.Mad sideskirts

Sidelights relocated and custom Car.Mad fog light ducts fitted

99 Spec Rear Light conversion

Smoked side indicators

Front headlight inserts painted chrome black

Roof bars and wing mirror plates painted gloss black

S2 electric folding & heated wing mirrors

Full body underseal

Security

Toad Ai606i Interactive Alarm & Immobiliser

Interior

LED dash and pod conversion

S2 heater pod and ECU

Option gauges and 3-gauge pillar pod - Oil pressure, Water Temp, Boost

Series 2 grey alcantara door and console trims (replacing original Series 1 grey tweed)

SkinZ sound deadening of doors and under rear bench

ICE Install - note that this is incomplete

Already fitted and included in the sale:

Infinity Kappa 60.2cs speakers x 2 fitting in custom tweeter housings

Infinity Kappa 652.1cs speakers x 2 fitted in front doors (6.5")

Infinity Kappa 52.1i speakers x 2 fitted in rear (5.25")

Sony XM-C2000 Stereo Power Amplifier - fitted in custom box in boot underfloor

Custom fasica panel to house 7" android tablet

High quality cabling and fuses used throughout

I was intending on installing a 7” Android tablet connected to a usb hub for a myriad of applications. I have all the component parts and am happy to include them all in the sale (exc the tablet) with my plans on how to complete if the buyer is interested in finishing this off themselves

I also have the sub to go with the setup - this will need a sub box. Sub is not currently included in the sale but happy to discuss if it’s of interest.

Infinity Kappa 100.1se subwoofer (10")

Other Parts

Original car jack, wrench and chocks in the original mouldings

Original targa bags

Spare Parts

Also included in the sale but not currently fitted:

AMS short shifter kit

Full lock set with replica titanium keys

Titanium dash rings

Spare drivers side targa panel

Lots of spare OEM screws, clips and

1 x uncut replica titanium key

2 x uncut spare metal keys (valet)

Several SKinZ sound deadening panels

Spare Exide EA755 car battery

I’m sure there are other bits and pieces which will surface as I start clearing out which I will include in the sale as well

Bad points:

With full disclosure in mind, the following points are the ones that I am currently aware of. None are insurmountable but worth mentioning:

Although the seats are original and date back to 1990 they are in a reasonably good condition and are still quite supportive. The exception to this is the driver’s side bolster which has a large hole in it through which the frame is showing. Should be a fairly straightforward part to switch out with a good condition spare/breaker

The fibreglass bodywork has a few areas that need attention - this is largely from grounding on raised surfaces (speed bumps etc)

The aftermarket oil pressure gauge is not working - this is likely just down to the aftermarket sender having failed. The stock gauge functions correctly

The passenger side window needs adjusting so that it sits more flush with the targa rubber. At the moment it can let in some water in a downpour however I keep the car garaged and rarely drive it in the rain so it hasn’t been a priority for me

NO TIME WASTERS. FULL ASKING PRICE IN CASH BEFORE ANY TEST DRIVES