MGB overdrive conversion
Discussion
I’m about to embark on removing engine/gearbox/diff for rebuilds on my 1970 MGB GT.
It’s currently a non-OD drivetrain and I’m considering adding an OD given everything will be off the car.
Does anybody have experience of doing this, or can offer recommendations for good engine / transmission rebuilds? (I was going to use Oselli for the engine).
Thanks
It’s currently a non-OD drivetrain and I’m considering adding an OD given everything will be off the car.
Does anybody have experience of doing this, or can offer recommendations for good engine / transmission rebuilds? (I was going to use Oselli for the engine).
Thanks
Thread update!
My father and I are doing the mechanical overhaul which will be a great opportunity to spend some time together.
I’ll periodically post updates and pics on progress as I always enjoy following other people’s build threads so thought a few might enjoy this one.
Background on the car:
It’s your common 1970 MGB GT with 1 former owner that is largely original having had a minor overhaul 20yrs ago whilst converting to unleaded. The car is priceless to me as my grandparents purchased it new the London Motorshow and handed it to me when my grandfather passed away. This means I want to do any work sympathetically to preserve as much originality as possible.
Progress:
Engine, gearbox and prop are now out of the car. The engine has shipped to Skiptune for a full rebuild, dynamic balancing and new cam. Carbs have gone off to Burlen to be reconditioned.
Next step is to remove the diff and send to Heathrow transmissions for a rebuild, along with dropping front / rear suspension to fully rebuild/ recondition.
We’ve decided to exchange the gearbox for an overdrive unit also from Heathrow transmissions.
My father and I are doing the mechanical overhaul which will be a great opportunity to spend some time together.
I’ll periodically post updates and pics on progress as I always enjoy following other people’s build threads so thought a few might enjoy this one.
Background on the car:
It’s your common 1970 MGB GT with 1 former owner that is largely original having had a minor overhaul 20yrs ago whilst converting to unleaded. The car is priceless to me as my grandparents purchased it new the London Motorshow and handed it to me when my grandfather passed away. This means I want to do any work sympathetically to preserve as much originality as possible.
Progress:
Engine, gearbox and prop are now out of the car. The engine has shipped to Skiptune for a full rebuild, dynamic balancing and new cam. Carbs have gone off to Burlen to be reconditioned.
Next step is to remove the diff and send to Heathrow transmissions for a rebuild, along with dropping front / rear suspension to fully rebuild/ recondition.
We’ve decided to exchange the gearbox for an overdrive unit also from Heathrow transmissions.
Engine rebuild is in progress (it is being bored out to 1900 due to the liners being on the limit for standard sized pistons).
Rear diff / axle / suspension also now removed. The diff and gearbox will be shipped off next week for rebuilding.
Car now on dolly’s ready for engine bay strip down to respray. Overall I’m really pleased with how solid the car looks underneath. No visible rust so I’ll just wire brush the underneath and re-coat with underbody seal.
Rear diff / axle / suspension also now removed. The diff and gearbox will be shipped off next week for rebuilding.
Car now on dolly’s ready for engine bay strip down to respray. Overall I’m really pleased with how solid the car looks underneath. No visible rust so I’ll just wire brush the underneath and re-coat with underbody seal.
Quick update: the front cross member and suspension all now removed and sent off for blasting / powder coating.
A decision is needed whether to completely remove the tar based underbody seal to spray on stone chip / correct paint, or just clean up and overpaint another coat of under seal. A messy job ahead!
A decision is needed whether to completely remove the tar based underbody seal to spray on stone chip / correct paint, or just clean up and overpaint another coat of under seal. A messy job ahead!
ReformedPistonhead said:
I you are doing all that I would replace the front suspension.
We did the frontline developments kit, has totally transformed the handling and replaces those nasty lever arm shocks with proper ones.
Hoyle also do a great kit, allegedly even better than the frontline.
This is super interesting! I’be been looking at those kits and debating with myself whether to do the conversion or keep fully original. What was the biggest difference you felt from the change?We did the frontline developments kit, has totally transformed the handling and replaces those nasty lever arm shocks with proper ones.
Hoyle also do a great kit, allegedly even better than the frontline.
Bit of a long overdue update…
Engine, gearbox & diff are all back from renovation. We’ve swapped the gearbox for an OD unit (this was the original driver for the project).
Various other parts such as carbs, cross member, suspension dampers and brake/clutch master cylinders also reconditioned from various specialists. We’ve managed to retain all original parts from the car except for the gearbox swap.
Underbody seal now removed (that was a horrid job) and ready for primer/stonechip/paint. Engine bay also now treated for surface rust, primed and repainted.
Hopefully only another few weeks away from starting the rebuilding phase.
Engine, gearbox & diff are all back from renovation. We’ve swapped the gearbox for an OD unit (this was the original driver for the project).
Various other parts such as carbs, cross member, suspension dampers and brake/clutch master cylinders also reconditioned from various specialists. We’ve managed to retain all original parts from the car except for the gearbox swap.
Underbody seal now removed (that was a horrid job) and ready for primer/stonechip/paint. Engine bay also now treated for surface rust, primed and repainted.
Hopefully only another few weeks away from starting the rebuilding phase.
Latest update:
Underbody fully stripped back, rust treated, primed and finished with underseal. In hindsight I’m really pleased we chose to fully remove the old underseal as a lot had dried/cracked which caused minor surface rust in quite a few areas.
Dashboard has been removed for blasting/crinkle finish powder coating and gauges have also been sent off for restoration. Bumpers and a few other chrome bits are being re-plated (gosh that’s expensive!).
We now have most parts back from being reconditioned so it’s time to begin rebuilding!!!!
Underbody fully stripped back, rust treated, primed and finished with underseal. In hindsight I’m really pleased we chose to fully remove the old underseal as a lot had dried/cracked which caused minor surface rust in quite a few areas.
Dashboard has been removed for blasting/crinkle finish powder coating and gauges have also been sent off for restoration. Bumpers and a few other chrome bits are being re-plated (gosh that’s expensive!).
We now have most parts back from being reconditioned so it’s time to begin rebuilding!!!!
Gassing Station | MG | Top of Page | What's New | My Stuff