Wiring Connector
Discussion
It's much easier to start again. But if you really want to get the connectors apart, they can be dismantled by pulling out the orange locking tab and using a pair of very small flat blade screwdrivers pushed down the sides (one each side) of the pins to release the locks. The pins will then pull out of the back of the connector.
I've been fiddling with the exact same connector plug - intermittent sound from the passenger side speaker.
I was going to take it to bits but electrical solvent spray and a good poke with a screwdriver seems to have fixed it.
Found these tools on ebay as mentioned above but they ain't cheap for a full kit.
I was going to take it to bits but electrical solvent spray and a good poke with a screwdriver seems to have fixed it.
Found these tools on ebay as mentioned above but they ain't cheap for a full kit.
Gassing Station | Griffith | Top of Page | What's New | My Stuff