Estoril Wheel Centres in aluminium anyone?
Discussion
Hi John
Picked them up from the post office today, they are cracking, so much better then the originals, I really like this kind of upgrade to our p&j's. You have done us proud sir, they were well worth the wait. Take your point above about depth of paint/powder coat, if i can get to the Growl this year would be good to have a beer.
Paul.
Picked them up from the post office today, they are cracking, so much better then the originals, I really like this kind of upgrade to our p&j's. You have done us proud sir, they were well worth the wait. Take your point above about depth of paint/powder coat, if i can get to the Growl this year would be good to have a beer.
Paul.
Argent said:
Hi John
Picked them up from the post office today, they are cracking, so much better then the originals, I really like this kind of upgrade to our p&j's. You have done us proud sir, they were well worth the wait. Take your point above about depth of paint/powder coat, if i can get to the Growl this year would be good to have a beer.
Paul.
cracking already ... the originals lasted a few years before they cracked!! Picked them up from the post office today, they are cracking, so much better then the originals, I really like this kind of upgrade to our p&j's. You have done us proud sir, they were well worth the wait. Take your point above about depth of paint/powder coat, if i can get to the Growl this year would be good to have a beer.
Paul.
Seriously tho, excellent stuff John
Cheers David... If your not going to paint them and want me to polish them up on the lathe, let me know and I'll do them for you... quick polish and wax.... think thats what I'll do with mine (when I get around to doing them )
Was thinking of putting 4 more screw holes in and fitting dummy screws spaced around the same PCD as the existing one... so gives the impression of 5 screws retaining the wheel?? what do you think??
Was thinking of putting 4 more screw holes in and fitting dummy screws spaced around the same PCD as the existing one... so gives the impression of 5 screws retaining the wheel?? what do you think??
Edited by TVR Beaver on Tuesday 16th August 00:39
TVR Beaver said:
Hi Dave.. All gone for this batch... But could do another 5 sets if we get enough people in again....
Mr Mojo wanted a set and if you are in, thats two sets....
Anyone else want some??
Delivery would be July / August time?
John
I'll have to hold off on these at the moment John, I need to sort out my leather problems first and can see that leading to me spending more money than I anticipated sooner that I would have liked !!Mr Mojo wanted a set and if you are in, thats two sets....
Anyone else want some??
Delivery would be July / August time?
John
Great timing!... I'm off to China tomorrow and will be collecting another 5 sets... so will have them back here for the 18th.... I already have the other bit's so can ship straight away... So that's 3 sets gone so far.... 2 set's spare if any more interest
V8S4ME..... Joe
Dave500.... Dave
Growlin8... Roy
Joe / Dave.. you still in?.. Cheers. John
V8S4ME..... Joe
Dave500.... Dave
Growlin8... Roy
Joe / Dave.. you still in?.. Cheers. John
Gassing Station | Griffith | Top of Page | What's New | My Stuff