show us your land rover
Discussion
Andy_mr2sc said:
After three years of evenings and weekends my M57 powered, air suspension 90 is about finished. Sadly I'm going to sell it due to an illness I now have, but not before it gets a feature in LRM magazine.
Just to add if you go to your local WH Smith’s on Jan 3rd and look for Februarys Land Rover Monthly, you’ll see this on the front cover. Andy_mr2sc said:
Andy_mr2sc said:
Just to add if you go to your local WH Smith’s on Jan 3rd and look for Februarys Land Rover Monthly, you’ll see this on the front cover. dlks151 said:
Andy_mr2sc said:
Andy_mr2sc said:
Just to add if you go to your local WH Smith’s on Jan 3rd and look for Februarys Land Rover Monthly, you’ll see this on the front cover. After a delay, involving becoming a father and having to get a new bathroom.
The disco project has taken a large step forward.
The underside of a car that’s spent the majority of its life in Scotland.
The welders having a good time as the nailer for the Dinitrol prep found some soft metal that we didn’t know of, alongside the metal we knew that needed replacing.
They are working through the extensive list of work needed to bring a car back to life.
Slowly steadily getting there, in a month or two I should have the very pleasant job of bolting the either new (bulkhead/front doors/rear door skins/back door) or restored/repaired (every other panel) back on to the restored, and very solid, chassis. It's a 1986 110SW, now with a 200Tdi and an R380 stumpy gearbox and it should be very pretty when it's done. I've done the entire thing myself (and I work in IT sales)
Gassing Station | Land Rover | Top of Page | What's New | My Stuff