Discussion
The mirror is loose and rocking up and down. That's why I think the torx screw is loose.
I was hoping to remove the mirror casing to allow access to the grub screw and turret.
If I can get to the three screws to take the casing off with the plastic assembly in place that's fine.
There was epoxy behind the mirror so I guess the lever mechanism had played up in the past.
DarkBlueGriff
I was hoping to remove the mirror casing to allow access to the grub screw and turret.
If I can get to the three screws to take the casing off with the plastic assembly in place that's fine.
There was epoxy behind the mirror so I guess the lever mechanism had played up in the past.
DarkBlueGriff
Gassing Station | Griffith | Top of Page | What's New | My Stuff