Pre-Cat Heater panel
Discussion
On the pre-cat Griffith the ones that have the black plastic panel,where the blower switch fits is the whole very large i.e to fit over the blower switch Knob.I know that the Knob is removable but does the blower switch stay in situ and the panel fits over it. Just trying to get some info on this panel with a view to make a new one.
Any help appreciated Barreti are you there.
Any help appreciated Barreti are you there.
Edited by Green Meanie on Tuesday 17th March 20:48
Now Now Boys can we come to some aggreement ( HA HA HA!)I believe that the Heater switches are mounted horizontally and the window switches are mounted vertically are you thinking of changing this arrangement? We really need to standardise these or everyone will be bespoke which will be MORE COSTLY and a Headache for yours truly.ARE you better sticking to the old TVR Layout?
THE MEANIE
THE MEANIE
Hi Antony,
Can you draw around it as you said and mark switch cutouts fixing holes etc,if your reluctant to part with it to a dodgy northern monkey(HA HA!).Glad you like your BESPOKE warning panel are you interested in a heater panel too? P.S can you let me know the panel thickness as well please
G.M
Can you draw around it as you said and mark switch cutouts fixing holes etc,if your reluctant to part with it to a dodgy northern monkey(HA HA!).Glad you like your BESPOKE warning panel are you interested in a heater panel too? P.S can you let me know the panel thickness as well please
G.M
Edited by Green Meanie on Wednesday 18th March 20:43
Edited by Green Meanie on Wednesday 18th March 20:48
Hi Barreti,
When I receive the drawing off Antony J I will make a start on a panel with the original layout,does the temp control switch have coloured LEDS(red and blue?) OR LETTERS H and C? and I presumme the screen /Feet switch just has UP and Down arrows.Also is there an illuminated symbol under the window switches? Need as much info as I can get please.
G.M
When I receive the drawing off Antony J I will make a start on a panel with the original layout,does the temp control switch have coloured LEDS(red and blue?) OR LETTERS H and C? and I presumme the screen /Feet switch just has UP and Down arrows.Also is there an illuminated symbol under the window switches? Need as much info as I can get please.
G.M
Right Guys I now have a sample of the original panel,(thanks Antony J)the symbols for HOT and COLD seem to be just two small round clear dots of about 2mm in diameter do the fibre optics shine through this and are WHITE?
The up and down are just arrows do these shine through WHITE as WELL, there is around dot in the middle of the Arrows of about 5mm is this illuminated as well?
The window symbol is clear as well is this correct
Are there no colours at all on this panel?
Please help so as I can get this underway
Thanks
G.M
The up and down are just arrows do these shine through WHITE as WELL, there is around dot in the middle of the Arrows of about 5mm is this illuminated as well?
The window symbol is clear as well is this correct
Are there no colours at all on this panel?
Please help so as I can get this underway
Thanks
G.M
Do the other symbols have a colour,and is the dot in the middle of the up and down arrows illuminated,sorry to be a pain but really need to know everything about this panel before I begin.
By the way Antony I will send the sample back to you after I have finished with it if you want.Hope it doesnt get damaged in the post!
G.M
By the way Antony I will send the sample back to you after I have finished with it if you want.Hope it doesnt get damaged in the post!
G.M
Hi
The panel is still on going,I have a problem with the material thickness maybe could bond the black engraved panel onto a clear backing piece. I think I will make the engraved panel in the thinner material first.
Dots for HOT and COLD or the letters H and C WHATS THE COLLECTIVE OPINION?
WILL THE KEEP ARROWS FOR UP AND DOWN
LET ME KNOW YOUR VIEWS PEOPLE BEFORE I MAKE THE PANEL
SORRY its taking so long but the brown stuff has hit the fan where I work,but please let me know you views on the above.
Thanks
G.M
The panel is still on going,I have a problem with the material thickness maybe could bond the black engraved panel onto a clear backing piece. I think I will make the engraved panel in the thinner material first.
Dots for HOT and COLD or the letters H and C WHATS THE COLLECTIVE OPINION?
WILL THE KEEP ARROWS FOR UP AND DOWN
LET ME KNOW YOUR VIEWS PEOPLE BEFORE I MAKE THE PANEL
SORRY its taking so long but the brown stuff has hit the fan where I work,but please let me know you views on the above.
Thanks
G.M
Gassing Station | Griffith | Top of Page | What's New | My Stuff