Roof Hoop bolt loose
Discussion
Its a nut inside the body which must be tight enough but not too tight
You need to get access by renoving carpet behind the door and shove your hand up 13mm ring spanner BUT watch out for sharp bit of fibreglass - can cut you to shreds.
Just double check first, I thought I had a slack nut/bolt but my targa hoop was broken
You need to get access by renoving carpet behind the door and shove your hand up 13mm ring spanner BUT watch out for sharp bit of fibreglass - can cut you to shreds.
Just double check first, I thought I had a slack nut/bolt but my targa hoop was broken
Thanks for the quick replies
Have just had the roof panels off and checked the other side which is the same. More pronounced with the stays down. Seeing the nyloc in the pictures suggests it's meant to move. quite a bit of movement round the bolt though. Guess it could be to allow a bit of give when opening/closing or could just be a bit of wear.
Have just had the roof panels off and checked the other side which is the same. More pronounced with the stays down. Seeing the nyloc in the pictures suggests it's meant to move. quite a bit of movement round the bolt though. Guess it could be to allow a bit of give when opening/closing or could just be a bit of wear.
Gassing Station | S Series | Top of Page | What's New | My Stuff