Billet brake & clutch pedals
Discussion
If we were talking say, Alloy steering arms for example, I think the above question + one may be a valid one but these are clutch and brake pedals FCS and therefor are NEVER going to need to withstand severe stress no matter how over developed your lower body may be
I have a pair of said pedals and have also had the pleasure of meeting/befriending Simon on several occasions and as a result can vouch wholeheartedly both for the integrity of the uprated parts and for Simon's keen eye for detail and his technical ability in such matters, but hey, what do I know
I have a pair of said pedals and have also had the pleasure of meeting/befriending Simon on several occasions and as a result can vouch wholeheartedly both for the integrity of the uprated parts and for Simon's keen eye for detail and his technical ability in such matters, but hey, what do I know
Right guys...apologies for the delay in getting back to all those who have expressed an interest in the pedals....as usual business trip overseas got in the way!!
Anyways to get things moving along I think the table below shows all those interested....could I please ask those with ???? shown(if still interested) to advise colour choice from the following gold, silver, blue, black or red. Other one off colours are available together with a hard anodizing finish however, these would be subject to additional cost on case by case basis...
Once I've got a complete listing I'll contact everyone directly to arrange payment/shipment - obviously for those overseas I'll need to confirm shipping charge.
Pedals come with bushes presssed in and all fittings needed to change out from factory pedal set-up
Regards, Simon
PS - Thanks for the kind words Wayne!
Anyways to get things moving along I think the table below shows all those interested....could I please ask those with ???? shown(if still interested) to advise colour choice from the following gold, silver, blue, black or red. Other one off colours are available together with a hard anodizing finish however, these would be subject to additional cost on case by case basis...
Heading | Heading 2 |
---|---|
srreck | gold |
knotty | gold |
scuderiagmt | gold |
BIGNUMBER2 | gold |
Mjpmark | ???? |
kikets | ???? |
Budala | ???? |
Bluesatin | ???? |
JoulesCanAm | ???? |
__ | __ |
Once I've got a complete listing I'll contact everyone directly to arrange payment/shipment - obviously for those overseas I'll need to confirm shipping charge.
Pedals come with bushes presssed in and all fittings needed to change out from factory pedal set-up
Regards, Simon
PS - Thanks for the kind words Wayne!
Can anyone tell me if these are made from 6082 or 2014, just interested to know as the strenghts and pricing on these grades and quite different. One is a rolled plate and the other is an Extrusion grade....
Plus does anyone here in North America deal with any good supliers of Aluminum ??
Plus does anyone here in North America deal with any good supliers of Aluminum ??
Gents...think we have 3 finished pedal sets available & ready to ship - 2 sets gold 1 set plain silver....I'll be heading over to workshop on Tuesday then contact those interested directly....hope that's ok?
Regards material spec Clive we've used 6082 T6 in this application which is more than sufficient given design & function. Next grade 7075 T6 is double the cost for raw material & would be overkill....HTH
Regards material spec Clive we've used 6082 T6 in this application which is more than sufficient given design & function. Next grade 7075 T6 is double the cost for raw material & would be overkill....HTH
Ultima Chat | Ultima | Top of Page | What's New | My Stuff