Leven stalks for the S..!
Discussion
Sounds like an excellent plan Psychobert - better still perhaps add names from this thread looking interested, and email saying 'propose Leven make the following shiny things for the S - tick appropriate boxes to express serious interest'
switches round [ ]
switches rectangular [ ]
stalks [ ]
bezels [ ]
air vents round [ ]
Just a thought, although I think LeeBee is doing some of the above?
switches round [ ]
switches rectangular [ ]
stalks [ ]
bezels [ ]
air vents round [ ]
Just a thought, although I think LeeBee is doing some of the above?
S3 Kieran said:
switches round [ ]
switches rectangular [ ]
stalks [ ]
bezels [ ]
air vents round [ ]
Just a thought, although I think LeeBee is doing some of the above?
Yes I am still working on all of the above, just had a new workshop built so I can sort things out a little easier.Will be meeting with my machinist this week to hopefully progress with a few items
Cheers
LeeBee
LeeBee said:
S3 Kieran said:
switches round [ ]
switches rectangular [ ]
stalks [ ]
bezels [ ]
air vents round [ ]
Just a thought, although I think LeeBee is doing some of the above?
Yes I am still working on all of the above, just had a new workshop built so I can sort things out a little easier.Will be meeting with my machinist this week to hopefully progress with a few items
Cheers
LeeBee
Depending on time scales, personally if LeeBee is going to the trouble to make all of the above items including stalks I would prefer to get them from him!! I didnt know that stalks would also be made and as I intend to buy all the bezels etc from LeeBee it makes sense to buy from one source! Any clearer on when you expect them to be ready LeeBee?
>> Edited by mike j smith on Wednesday 20th August 10:43
At the risk of sounding like a broken record, we still have only 13 people who have "nailed their colours to the mast".....THIS IS NOT ENOUGH. If you ever want the chance to have Leven aluminium stalks in your S act now and or Leven (number and email address given previously).
I spoke to Simon at Leven today and we need at least another 12 people to show serious interest. If we get the numbers then in about two months time we could have these things available to us. If we don't have any more interest then the result will be obvious.
Kevin
I spoke to Simon at Leven today and we need at least another 12 people to show serious interest. If we get the numbers then in about two months time we could have these things available to us. If we don't have any more interest then the result will be obvious.
Kevin
Looks like we've blown it!!! I just spoke to Leven and to date a total of 19 interested parties. Not enough I'm afraid. They said that they would do the costings on making a limited run for those who expressed interest but speculated that the cost would frighten most of us away. I'm sure the costings will not be one of their priorities either....I'd certainly put it on a back burner if I were them.
What a shame!
Kevin And Emma
What a shame!
Kevin And Emma
Here is the prototype I am working on, this is just the blank for the light switch, it has yet to have the radius machined on the edges and end, I hope to have the other arms machined in the next couple of weeks (currently designing the switch mechanism for the wiper wash and horn)
Cheers
LeeBee
Yes this is a bit of a problem as my alloy stalks are machined out of a billet of aluminium and cannot have a hole to accomodate the rod without a lot of hassle, I think I have found a solution though so when I have the other 2 stalks ready I will let you know
Here is another view
Cheers
LeeBee
Here is another view
Cheers
LeeBee
Gassing Station | S Series | Top of Page | What's New | My Stuff