still no back lights

still no back lights

Author
Discussion

BRGS2

Original Poster:

2,802 posts

250 months

Wednesday 10th September 2003
quotequote all
OK - replaced the light clusters - put back and the offside didnt work (other than brake light).

Removed the 6 pin connector and gave the contacts a clean - still no joy

Bulbs all look ok - so dont know where else to check.

any ideas anyone?

Podie

46,630 posts

277 months

Wednesday 10th September 2003
quotequote all
Drop Shnozz a line... he's familiar with them

keirangrogan

486 posts

266 months

Wednesday 10th September 2003
quotequote all
BRGS2 said:
OK - replaced the light clusters - put back and the offside didnt work (other than brake light).

Removed the 6 pin connector and gave the contacts a clean - still no joy

Bulbs all look ok - so dont know where else to check.

any ideas anyone?


Probabaly worth replacing the conectors and bulb holders, around £7 per side, they were always going on the Escorts.

BRGS2

Original Poster:

2,802 posts

250 months

Wednesday 10th September 2003
quotequote all
OK -
any idea where can I get one from?

Podie

46,630 posts

277 months

Wednesday 10th September 2003
quotequote all
BRGS2 said:
OK -
any idea where can I get one from?


Ford...

RichardR

2,892 posts

270 months

Wednesday 10th September 2003
quotequote all
BRGS2 said:
OK - replaced the light clusters - put back and the offside didnt work (other than brake light).

Removed the 6 pin connector and gave the contacts a clean - still no joy

Bulbs all look ok - so dont know where else to check.

any ideas anyone?
My offside light only works correctly if I apply some upwards pressure to the connector - this function is now taken care of by a piece of insulating tape.

Replacing the connectors would obviously resolve this. The part that you'll find at the Ford dealer with be the bulb holder.

Le TVR

3,092 posts

253 months

Thursday 11th September 2003
quotequote all
The main problem with the rear cluster is that the 'wiring' on the bulb-holders is just strips of pressed steel and the 'connections' rely on a bit of clamping. Soldered mine, end of story.