Discussion
Yes, I saw those. Quite a trek up to Hunstanton though. The seats I have are in better condition than those but are very uncomfortable. The headrest is actually between my shoulder blades and my neck aches after just a few miles. 'S' seats I know are very comfortable and will fit straight in. MX5 are another option I suppose.
Edited by v8s4me on Monday 7th November 18:08
The seats I have in my 'S' are Cerb ones, and very comfortable they are too. I'm on the scrounge for 'S' seats for my Tasmnin because I know from experience they are very comfortable, although the backs on these are low too, but not as low as the Tasmin ones.
Have you tried putting spacers under your existing seats? You may also find the runners aren't quite aligned. This is what could be causing your lopsided effect. Based on past experience with my old 'S' seats I'd suggest you take the driver's one out and refit it carefully using a sprit level and spacers where necessary. A bit of fiddling about might improve things for you.
Have you tried putting spacers under your existing seats? You may also find the runners aren't quite aligned. This is what could be causing your lopsided effect. Based on past experience with my old 'S' seats I'd suggest you take the driver's one out and refit it carefully using a sprit level and spacers where necessary. A bit of fiddling about might improve things for you.
DJR 7 said:
...I'm having the same problem with mine,...
Here's another little bodge you can try to make your seats a bit more comfortable....http://www.pistonheads.com/gassing/topic.asp?h=0&a...
glenrobbo said:
.. What's happening at Shuttleworth then? Details please Joe! It's not on our events wiki.......
But it is on the TVR Regional Events Calendar It the Herts Group monthly meet, usually (but not always) on the 3rd Sunday of the month. It can get moved if Shuttleworth have a flying event on that day.Be good to see more 'S's there.
Gassing Station | S Series | Top of Page | What's New | My Stuff