Discussion
Started my holiday by pulling the seats out the car ready to be recovered. Repaint the chassis while I'm under there beginning with the trailing arms.
Well a set of new adjustable arms are now on the way so I'm looking for the set up info on how to shim them and what toe-in etc should be. Search function has been dead for several days so I can't hunt the forum.
Everything else is in surprisingly good condition. Had a long chat with Steve Reid about the critical parts of the chassis and they all seem fine. With one other exception, the fuel tank frame.
Not suprising as it appears the drain hose from the boot lid has been emptying on this frame for 22 years!
Finally it would be nice to source a new(ish) seat cushion foam for the drivers side. The original has just about disintegrated.
Well a set of new adjustable arms are now on the way so I'm looking for the set up info on how to shim them and what toe-in etc should be. Search function has been dead for several days so I can't hunt the forum.
Everything else is in surprisingly good condition. Had a long chat with Steve Reid about the critical parts of the chassis and they all seem fine. With one other exception, the fuel tank frame.
Not suprising as it appears the drain hose from the boot lid has been emptying on this frame for 22 years!
Finally it would be nice to source a new(ish) seat cushion foam for the drivers side. The original has just about disintegrated.
Gassing Station | S Series | Top of Page | What's New | My Stuff