Where can I buy a 4 point jack/lift system???
Discussion
Did everyone get the £75 discount as Piston Headers??????
I hope us up norf will get ours on the next trip to the UK next week, but Fred hasn't confirmed that yet and I need 150mm cutting off the top of mine, to take it down to 2 metres high. Anyone else asked for the height cut off sensors???
I hope us up norf will get ours on the next trip to the UK next week, but Fred hasn't confirmed that yet and I need 150mm cutting off the top of mine, to take it down to 2 metres high. Anyone else asked for the height cut off sensors???
Edited by glow worm on Wednesday 6th February 14:11
That looks really good, Fred rang today , mine comes on Thursday. I've got the Blackpool TVRCC heavy gang ready to go for a week on Sunday. So any construction tips would be appreciated.
Will the 'S' fit underneath??? It's just I fancy getting something for going to the shops in......A Chim 450 or a Griff 500, keep the Tuscan for proper driving
Will the 'S' fit underneath??? It's just I fancy getting something for going to the shops in......A Chim 450 or a Griff 500, keep the Tuscan for proper driving
Edited by glow worm on Friday 8th February 19:07
AndrewW-G said:
Quinny said:
Mines due on Wednesday
Mines also due on Wednesday.........guess your's will be there in the morning will be great having more storage at home and not having to rely on the ones at work
How many orders has this thread generated??? And how many more lurkers are out there????
Edited by glow worm on Sunday 10th February 21:56
AndrewW-G said:
Mines just arrived ......lots of fun getting it up the drive though
Glow Worm he should be with you in a 1.5 - 2 hours
thanks MPx for the hints and tips, just waiting for friends to arrive to help stick it all together!
Yipeee Mines arrived....I was a bit worried as he raised his forklift and carried over the top of next doors cars (They looked concerned too, but if they hadn't blocked my access wouldn't have been a problem).Glow Worm he should be with you in a 1.5 - 2 hours
thanks MPx for the hints and tips, just waiting for friends to arrive to help stick it all together!
Just taken the delivery driver to a nearby Hotel and got his wagon parked up OK for the night. As everyone says really nice bloke...Got the heavy gang ready for Sunday and bought a bottle of Nasty Asti ready for the launch. So its all systems go.... We should create a Gallery of Photos...I gave the Photo of MRS BC's to the driver along with the notes...He was dead impressed looking at MRS BCs assembled lift on PH on my PC. Good Luck to everyone.
Just to confirm the only instructions are the ones on the Website??? And box only contains motor??? Can't see any bags of bolts??? Not missing anything am I???? Just I know where the driver is tonight.
I've had my posts cut down to 2 metres, so its must have a been unpacked and packed up again....Is the hydraulic perspex pipe inside the big package??? Can't see inside until I unbolt it all tomorrow.
Nice touch for FRED to provide the TVR stickers for the lift.
Edited by glow worm on Wednesday 13th February 19:13
Well done Quinney...I've half done mine and worked out where everything goes...Only problem I can see so far, Is one of the long bolts for the ramp end of runway has been bashed and the thread is knackered. I'll pop down to "All Thread" and hopefully get a new one (or two). I've taken the motor apart and I'll be replacing those two nasty wires with a nice cable and plug.Still to work out how to wire in the Automatic Sensor, I guess it's a 'switched live' system.....I'm impressed with the strength of the beast...I had no problems with welds and the plastic runners. I didn't get any motor nuts, but had some 25mm M8s that fit.....I've got 4 160mm M10s (I think)...What are they for??
Not finished yet,thats Sunday morning....But it strikes me the motor plate has been welded on the frame upside down, hence the slots don't line up, or you put the motor upside (but that would make filling it with oil difficult ). I think I'll just use 4 bolts rather than 6, measuring it , doesn't seem a need to drill out. Mr BC has elongated holes, what about you Quinny??? or anyone else???
Got mine installation completed today, put the BMW on it OK. No problems other than the motor bolt holes. Must say , I did learn from the experience of others. Only hint I have for others, is take nuts off cables to thread them past pulleys and thought about taking the pulleys off (of course we tried without and struggled for a bit, piece of cake with th nuts off). I checked the cross diagonal, and absolutely dead on equal to the millimetre. Since we're old gits (with bad backs already), I went for 6 to perform the lift. How Mr & Mrs BC did I , I will never know , but I won't like to fall out with Mrs BC .
I will be at Chatwsorth with a small band of Tuscan Convertible owners, So see you all there.
In the meanwhile here are my pics from today:-
One thing that did happen today, my posts weren't spot on vertical and as I took the lift higher, the stops ran out of their track , hence didn't engage properly. Obviously the higher you go the more noticeable any out off alignment is, so word of caution. Also make sure ALL stops are released on downward travel, otherwise lift will come down on a tilt.....Lesson 1 ....Keep your eyes on the car and look for a level descent. No accidents , but could have been.
Oh, and yes I have the 4 bolts still left over!!!! Agree with Mr. BC those top plates and bolts take all the load.
In the meanwhile here are my pics from today:-
One thing that did happen today, my posts weren't spot on vertical and as I took the lift higher, the stops ran out of their track , hence didn't engage properly. Obviously the higher you go the more noticeable any out off alignment is, so word of caution. Also make sure ALL stops are released on downward travel, otherwise lift will come down on a tilt.....Lesson 1 ....Keep your eyes on the car and look for a level descent. No accidents , but could have been.
Oh, and yes I have the 4 bolts still left over!!!! Agree with Mr. BC those top plates and bolts take all the load.
Edited by glow worm on Monday 18th February 18:33
hiltonig said:
Right I going to order one too, Where did you get your TVR stickers Glow ??
can the overall length be made smaller ??, I have a single garage and its going to be a tight fit
They just came with the lift, I'd told Fred I had a TVR, so he did them of his own accord...told you he's a nice bloke...just ask him for them.... can the overall length be made smaller ??, I have a single garage and its going to be a tight fit
I think it would be difficult making the runways shorter...don't forget the extra room you need for the locking stops lever + 1 metre approx.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff