Discussion
Ive just gone over my car with machine polisher and 3m to get rid of swirls which it has done. Whats my next stage. Ive got lime prime,black hole glaze, SRP and zymol cleaner wax all in my garage( im not sure which one to use) followed by dodo purple haze wax or autoglm EGP.
What should I be using out of that lot. Its on a black TVR T350
Thanks in advance
Aubrey
What should I be using out of that lot. Its on a black TVR T350
Thanks in advance
Aubrey
Esseesse said:
Super Resin -> Extra Gloss
or
Super Resin -> HD Wax (Carnuba)
Which is best and why?
The million dollar question!or
Super Resin -> HD Wax (Carnuba)
Which is best and why?
HD is slightly easier to apply & remove but that's not to say Extra Gloss is difficult!
Why not do half the car with Extra Gloss, the other half with HD and report back your findings!?
Both sides will look the same to the human eye, it'll just be water behaviour & durability that will differ.
I'd recommend Bilt Hamber Cleanser Fluid followed by a couple of coats of Finis Wax.
Might seem expensive to buy but it goes a really long way and is easy to use and gives great results.
I'd expect if you topped it up a couple of times (even with a quick spray wax) that it would last into the Spring.
Might seem expensive to buy but it goes a really long way and is easy to use and gives great results.
I'd expect if you topped it up a couple of times (even with a quick spray wax) that it would last into the Spring.
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff