Sanding Primer
Discussion
I put the lacquer on after about an hour and it reacted badly. Turned the colour from a good colour match to a dull dark grey. Is there anyway I can re-spray the final colour coat after wet dry sanding or would I need to sand back to the primer something I wouldn't really want to do. Thanks for any advice.
leafspring said:
you can rub the lacquer off, re-apply another layer of colour coat over the last colour coat and try lacquering again... after a longer wait.
Try to keep the rubbing even so you don't get patches of primer showing through the old colour coat though because you may be able to see subtle colour changes on the finished article.
Thanks for the re-apply, What grit wet dry would you recommend on the colour coat before I apply a new coat off this?Try to keep the rubbing even so you don't get patches of primer showing through the old colour coat though because you may be able to see subtle colour changes on the finished article.
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff