Spotted - Metallic Red Chim in St Tropez
Discussion
chimalsu said:
doing the route napoleon in september on the bike,sounds like you enjoyed it rsv.
Most memorable section was following a mate on an RC8 along a fast section. By the time we pulled over, the sides of the rear 2CT were soft like plasticine 
With roads like these, you can't go far wrong
The Gaz Gold Pros seemed to do the job.
Not sure I can go as far as saying they transformed the handling though.
On certain motorway roads where the shuttering is very evenly spaced there seems to be some oscillation.
It manifests itself as a slight bobbing from the front end that can be a little nauseating.
Its only on certain roads and only when cruising in a straight line so I cant say its a big issue.
A very small change in direction or slowing/accelerating gets rid of the oscillation immediately.
Before the Gaz Golds I had some clacking noises that I thought came from the original Bilsteins.
The Gaz Gold Pros actually seem to have exasperated this, so I am not convinced there was any need to change my dampers in the first place.
This is not a fault of the Gaz product but likely to be down to the firmer spring ratings putting extra strain on the other worn suspension components.
I have replaced all the wishbone bushes recently and the ARB link plates on the wishbones are not cracked like they do sometimes.
I think the clacking noise is anti roll bar mounts or ARB drop link related, or more likely both.
The noise only presents itself on lateral pitching like when you first attack a bend, brake or drive on very heavily rutted roads with camber changes.
I plan to polly bush the ARB mounts and fit rose jointed drop links to see if this helps.
Anyone got any other ideas of what this annoying clacking noise could be?
Not sure I can go as far as saying they transformed the handling though.
On certain motorway roads where the shuttering is very evenly spaced there seems to be some oscillation.
It manifests itself as a slight bobbing from the front end that can be a little nauseating.
Its only on certain roads and only when cruising in a straight line so I cant say its a big issue.
A very small change in direction or slowing/accelerating gets rid of the oscillation immediately.
Before the Gaz Golds I had some clacking noises that I thought came from the original Bilsteins.
The Gaz Gold Pros actually seem to have exasperated this, so I am not convinced there was any need to change my dampers in the first place.
This is not a fault of the Gaz product but likely to be down to the firmer spring ratings putting extra strain on the other worn suspension components.
I have replaced all the wishbone bushes recently and the ARB link plates on the wishbones are not cracked like they do sometimes.
I think the clacking noise is anti roll bar mounts or ARB drop link related, or more likely both.
The noise only presents itself on lateral pitching like when you first attack a bend, brake or drive on very heavily rutted roads with camber changes.
I plan to polly bush the ARB mounts and fit rose jointed drop links to see if this helps.
Anyone got any other ideas of what this annoying clacking noise could be?
Looking at all the threads for fellow PHers it seems there are a lot of TVRs heading to the South of France over the summer months.
Perhaps a person will post a date for a ‘TVR Euro meet’, at a hotel somewhere on the south coast where all fellow TVRs can meet
for a day or weekend of sun bathing, visits to a local places of interest "involving a cruise of course" maybe setting of in the morning heading towards Gresse then Castellane, take in lunch return via the D21 Bargemon then the D2562 direction of Gresse, arrive at the hotel hit the pool or beach for a cool off,some
maybe dinner in a nice restaurant for the ladies
To be really
go further east towards Villfranche-sur-Mer 
complete a drive in the VAR region, similar itinerary.
Perhaps a person will post a date for a ‘TVR Euro meet’, at a hotel somewhere on the south coast where all fellow TVRs can meet
for a day or weekend of sun bathing, visits to a local places of interest "involving a cruise of course" maybe setting of in the morning heading towards Gresse then Castellane, take in lunch return via the D21 Bargemon then the D2562 direction of Gresse, arrive at the hotel hit the pool or beach for a cool off,some
maybe dinner in a nice restaurant for the ladies
To be really
go further east towards Villfranche-sur-Mer 
complete a drive in the VAR region, similar itinerary.
Chimpaholic said:
The Gaz Gold Pros seemed to do the job.
Not sure I can go as far as saying they transformed the handling though.
On certain motorway roads where the shuttering is very evenly spaced there seems to be some oscillation.
It manifests itself as a slight bobbing from the front end that can be a little nauseating.
Its only on certain roads and only when cruising in a straight line so I cant say its a big issue.
A very small change in direction or slowing/accelerating gets rid of the oscillation immediately.
Before the Gaz Golds I had some clacking noises that I thought came from the original Bilsteins.
The Gaz Gold Pros actually seem to have exasperated this, so I am not convinced there was any need to change my dampers in the first place.
This is not a fault of the Gaz product but likely to be down to the firmer spring ratings putting extra strain on the other worn suspension components.
I have replaced all the wishbone bushes recently and the ARB link plates on the wishbones are not cracked like they do sometimes.
I think the clacking noise is anti roll bar mounts or ARB drop link related, or more likely both.
The noise only presents itself on lateral pitching like when you first attack a bend, brake or drive on very heavily rutted roads with camber changes.
I plan to polly bush the ARB mounts and fit rose jointed drop links to see if this helps.
Anyone got any other ideas of what this annoying clacking noise could be?
Ball joints? One of mine failed an MOT but I did all four, when I got the rubbers off the three that passed the MOT were all rusty inside.Not sure I can go as far as saying they transformed the handling though.
On certain motorway roads where the shuttering is very evenly spaced there seems to be some oscillation.
It manifests itself as a slight bobbing from the front end that can be a little nauseating.
Its only on certain roads and only when cruising in a straight line so I cant say its a big issue.
A very small change in direction or slowing/accelerating gets rid of the oscillation immediately.
Before the Gaz Golds I had some clacking noises that I thought came from the original Bilsteins.
The Gaz Gold Pros actually seem to have exasperated this, so I am not convinced there was any need to change my dampers in the first place.
This is not a fault of the Gaz product but likely to be down to the firmer spring ratings putting extra strain on the other worn suspension components.
I have replaced all the wishbone bushes recently and the ARB link plates on the wishbones are not cracked like they do sometimes.
I think the clacking noise is anti roll bar mounts or ARB drop link related, or more likely both.
The noise only presents itself on lateral pitching like when you first attack a bend, brake or drive on very heavily rutted roads with camber changes.
I plan to polly bush the ARB mounts and fit rose jointed drop links to see if this helps.
Anyone got any other ideas of what this annoying clacking noise could be?
Have you been back to Gaz to get the shocks reset now its settled down?
Also I really think you ought to have a front splitter!
(Only showing off because as you pointed out, I still have mine!)
Gassing Station | Spotted TVRs | Top of Page | What's New | My Stuff





