new colour Aim dash
Discussion
confusionhunter said:
Thanks for pushing this Dom.... I do like this idea.... However I do hate the road going version has all the functions aligned to the wrong colour lights..... Indicators are green and full beam blue on pretty much every car Ive ever owned for example!
Colours are programable. you can change indicators to greenThanks Dom do keep me updated.
It would be a great addition if it's doable in our set up but it does need to be affordable for me to be able to justify it. If its going to cost hundreds or more on top of the cost of the dash unit then it won't viable for me.
Great strides so far and my thanks for the effort you are putting into this.
It would be a great addition if it's doable in our set up but it does need to be affordable for me to be able to justify it. If its going to cost hundreds or more on top of the cost of the dash unit then it won't viable for me.
Great strides so far and my thanks for the effort you are putting into this.
I was reading up on the Stack ST9918 last night and it's very similar to the Aim MXG or the Motec C127. The price is about the same for both dashes, but the Stack/Autometer sensors cost more than the Aim sensors, 2-3x more in some cases. The only feature I like better about the Stack is that the buttons are on the face of the dash rather than the sides.
I don't know about Dom but I decided to go with the AIM MXS and the matching gauge surround from Ultima. There is a suite of sensors I want to run for each corner, 16 channel brake disc temp, 16 channel tire temp, and suspension load sensors which I can log with the dash and overlay onto video. These are all AIM sensors ready to go, and I just need a data hub at each corner. My kit should be shipping after the Stoneleigh show, and hopefully ill have it in July/August to start my build then.
Will
Will
If you are in the ultima owners bit on FB:
https://www.facebook.com/groups/376171159156661/pe...
https://www.facebook.com/groups/376171159156661/pe...
https://www.facebook.com/groups/376171159156661/pe...
https://www.facebook.com/groups/376171159156661/pe...
V8Dom said:
i didnt go any further . if more people were interested id have gone further but change of plans means i might be selling my Ultima soon so for next owner to decide
You have been 'selling' your Ultima for years now Dom. Is it for real this time or will you suddenly realise you can't get that performance for anything near the money elsewhere.Or are you getting too old to be able to get in it!!!!!
Paul
Storer said:
You have been 'selling' your Ultima for years now Dom. Is it for real this time or will you suddenly realise you can't get that performance for anything near the money elsewhere.
Or are you getting too old to be able to get in it!!!!!
Paul
i just dont use it Paul.. not to old.. maybe as i get older i realise cops are targetting my licence more when i go out.. i will miss it if i sell it, but a waste not being usedOr are you getting too old to be able to get in it!!!!!
Paul
deadscoob said:
That's the problem eh.
You can't use the performance on the road really, if you don't use it much what's the point.
Until you go for a drive and the cycle repeats
got spotted again on sunday and followed by unmarked car,, luckly i spotted him..You can't use the performance on the road really, if you don't use it much what's the point.
Until you go for a drive and the cycle repeats
its the most photographed car in cheshire and everyone knows its me if the want a moan...lol;
Hi Guys,
I'm after a little help.
We've just fitted an AIM MXS digital dash to my Dad's race car running Motec M4 management and we are struggling to configure it all.
The system is all hard wired and up and running but wondered if anyone knows how to do this or ideally anyone we can get to come and do it for us.
We have spent many hours of head scratching and faffing around and the car needs to be ready for the first meeting in a week.
Many thanks,
Gilbo
I'm after a little help.
We've just fitted an AIM MXS digital dash to my Dad's race car running Motec M4 management and we are struggling to configure it all.
The system is all hard wired and up and running but wondered if anyone knows how to do this or ideally anyone we can get to come and do it for us.
We have spent many hours of head scratching and faffing around and the car needs to be ready for the first meeting in a week.
Many thanks,
Gilbo
Gassing Station | Ultima | Top of Page | What's New | My Stuff