Discussion
SchimmS said:
Thanks for the pics but aren't there are some more mods to the Standard Ultima brakes ;-)
yes there are, Brembo 8-pot clipers with 365mm rotors, but basically this is a different topic as long as the brakes fit under the alloys. The factory AP setup has 320mm rotors, which normally will not present any problems with different wheels, as there is plenty of room left under 18" alloys.
SchimmS said:
Would that also work with the OZ Superturismo? Do you always need adapters to fit other wheels?
if you intend using wheels from a manufacturer, which doesn't support the "quite uncommon" Ultima/Ford PCD for the desired rim dimensions, the way to go is: fit adaptors or choose different wheels.cooberpedy said:
Pedders said:
Hi Cooberpedy - did you have to remove the existing lugs from the hubs in order to fit the adaptors?
Many thanks.
are you referring to the PCD adaptors or to the caliper adaptors?Many thanks.
both are simply bolted on.
Edited by cooberpedy on Wednesday 14th January 13:17
Many thanks again.
V8Dom said:
May I ask how expensive the adapters were to make? And are wheels a cheaper option
Well, in the end it comes out equal.But now i have the chance to have all kind of porsche wheels or at least aftermarket wheels with prosche pcd. This is quite an advantage if you plan to have more than one set of wheels for track and road...
Gassing Station | Ultima | Top of Page | What's New | My Stuff