GTR and trailor
Discussion
I think you are talking about Jim in America who is entering the One Lap of America Event, 7 days 3,425 miles. That includes some of the most famous race tracks in America. You have to carry everything without outside assistance for road & track work:
These vids show more:
https://www.youtube.com/watch?t=13&v=UpdzfIQPb...
https://www.youtube.com/watch?v=0qLpivb4kFY
Good luck Jim!
These vids show more:
https://www.youtube.com/watch?t=13&v=UpdzfIQPb...
https://www.youtube.com/watch?v=0qLpivb4kFY
Good luck Jim!
Nice photo.
I'll take a few more from different profiles. It's a little larger then what I set out to make but it will work. I added the V front part to split the air. Now I need to sticker it up. The box is made of Aluminum railing from a company called 80/20. The panel is Alumalite (two thin sheets of Aluminum with a composite corrugated center, 6mm thick and very strong).
I leave on Thursday to drive to the Tire Rack facility, 700 miles to get to the start of the event. I hope to finish the event and at least get middle of the pack overall.
typical, I'm getting prepared and I'm looking the car over and cleaning and notice a piece of metal sticking out of the CV boot metal cover. I took it apart to find a piece of the CV joint cage broke off. I'm glad I noticed it before the heaving usage.
If anyone has Twitter and you want to follow the info and photos I post, follow me at 2001UltimaGTR
I'll take a few more from different profiles. It's a little larger then what I set out to make but it will work. I added the V front part to split the air. Now I need to sticker it up. The box is made of Aluminum railing from a company called 80/20. The panel is Alumalite (two thin sheets of Aluminum with a composite corrugated center, 6mm thick and very strong).
I leave on Thursday to drive to the Tire Rack facility, 700 miles to get to the start of the event. I hope to finish the event and at least get middle of the pack overall.
typical, I'm getting prepared and I'm looking the car over and cleaning and notice a piece of metal sticking out of the CV boot metal cover. I took it apart to find a piece of the CV joint cage broke off. I'm glad I noticed it before the heaving usage.
If anyone has Twitter and you want to follow the info and photos I post, follow me at 2001UltimaGTR
All, I returned home on Sunday, ~4,700 miles. Could not tell there was a trailer being towed. The event was a lot of fun stuffing 8 track days into 8 days.
Photo of day 7 heading back to Tire Rack
https://www.facebook.com/OneLapOfAmerica/photos/a....
Photo of day 7 heading back to Tire Rack
https://www.facebook.com/OneLapOfAmerica/photos/a....
2001ultima said:
All, I returned home on Sunday, ~4,700 miles. Could not tell there was a trailer being towed. The event was a lot of fun stuffing 8 track days into 8 days.
Photo of day 7 heading back to Tire Rack
https://www.facebook.com/OneLapOfAmerica/photos/a....
Was it you who had the broken suspension? If so how did you get going again.Photo of day 7 heading back to Tire Rack
https://www.facebook.com/OneLapOfAmerica/photos/a....
Steve
I've been posting photos and video to here: https://www.facebook.com/jim.nelson.315
Gassing Station | Ultima | Top of Page | What's New | My Stuff