Door frames paintwork

[mgsontour]

Hi all

I need to replace white internal doors but the frames and skirting boards have been previously painted in a duck egg colour, I don't fancy stripping the old paint as there is a lot of it but would rather sand and add a couple of quality white paint, but what paint do I need to bring it back to a bright white?

Thanks in advance

[Dr.Hellno]

Bedec MSP or Bedec Aqua Advanced from Toolstation are very good. They do a satin and gloss finish and are water-based so no fumes and won’t yellow over time like oil-based white.

[dmsims]

Zinsser All Coat exterior is also good

[Super Sonic]

mgsontour said:

, but what paint do I need to bring it back to a bright white?

Thanks in advance

You need bright white paint.

[Aluminati]

Super Sonic said:

mgsontour said:

, but what paint do I need to bring it back to a bright white?

Thanks in advance

You need bright white paint.

[the benno]

Caparol Haft primer then 2 coats of Benjamin Moore Scuff X Satin

[Paul Drawmer]

rub down the frames and give them two coats of this.
https://leylandtrade.com/products/interior-trim-pr...

You will need turps to clean up and it needs 16hrs between coats. But, it's easy to apply and is opaque with a good finish.