Quick Question - MY10 Tech Pack and Bluetooth
Discussion
Is this the later unit, if so...
I have had mine paired with a bold and a curve. It doesn't however automatically pair again properly. It pairs but not completely so you need to either receive a call or make one from the handset to force through the complete pair process.
This seems to be a common problem that can be fixed by replacing the BT400 unit with the BT200 unit which is more reliable. I have sort of got used to it now and don't make calls whilst driving. As it will receive them I'm not too bothered.
I have had mine paired with a bold and a curve. It doesn't however automatically pair again properly. It pairs but not completely so you need to either receive a call or make one from the handset to force through the complete pair process.
This seems to be a common problem that can be fixed by replacing the BT400 unit with the BT200 unit which is more reliable. I have sort of got used to it now and don't make calls whilst driving. As it will receive them I'm not too bothered.
Edited by Boogs on Sunday 23 February 20:19
As I understand it the module is buried somehwere in the dash and the instrument pack needs to come out to swap it over.
It's actually the HCE-250BT, you need:
Full write up here when I was having issues(don't think I am but hope I am not breaking any rules cross linking to SELOC):
http://forums.seloc.org/viewthread.php?tid=335844&...
It's actually the HCE-250BT, you need:
Full write up here when I was having issues(don't think I am but hope I am not breaking any rules cross linking to SELOC):
http://forums.seloc.org/viewthread.php?tid=335844&...
Gassing Station | Evora | Top of Page | What's New | My Stuff