Preventing doors from icing shut?

Preventing doors from icing shut?

Author
Discussion

FreeLitres

Original Poster:

6,059 posts

179 months

Monday 15th November 2010
quotequote all
I went out to de-ice my car this morning and it took me a while to get my car door open – it had iced shut! This happened a few times last year too.

Is there anything I can do to help prevent this from happening?

I am thinking some kind of waterproof grease (Silicone grease?) that I can wipe along the rubber door seals which will not perish the rubber.

Any ideas?

Stu R

21,410 posts

217 months

Monday 15th November 2010
quotequote all
Auto Glym vinyl and rubber protector. put on, leave for a bit, wipe off. Doesn't leave streaky grease all over the place.

TRUENOSAM

763 posts

172 months

Monday 15th November 2010
quotequote all
Spray WD40 on a rag and wipe the seals down. That does the trick every time. Especialy on pillarless doors

u13rr1

527 posts

203 months

g3org3y

20,681 posts

193 months

Monday 15th November 2010
quotequote all
u13rr1 said:
yes Also very good to stop rubber seals drying out in summer.

Unfortunately the OE BMW item is NLA. frown


roverspeed

700 posts

198 months

Monday 15th November 2010
quotequote all
Very thin smearing of Vaseline Petroleum jelly on the rubbers (ooo err) will help also.

u13rr1

527 posts

203 months

Monday 15th November 2010
quotequote all
roverspeed said:
Very thin smearing of Vaseline Petroleum jelly on the rubbers (ooo err) will help also.
And also rot them redcard

mph999

2,718 posts

222 months

Monday 15th November 2010
quotequote all
roverspeed said:
Very thin smearing of Vaseline Petroleum jelly on the rubbers (ooo err) will help also.
NNNooooooooo, any petroleum based products will rot the seals ...

M

Motown Junk

2,041 posts

219 months

Monday 15th November 2010
quotequote all
Stu R said:
Auto Glym vinyl and rubber protector. put on, leave for a bit, wipe off. Doesn't leave streaky grease all over the place.
yes

FreeLitres

Original Poster:

6,059 posts

179 months

Monday 15th November 2010
quotequote all
mph999 said:
roverspeed said:
Very thin smearing of Vaseline Petroleum jelly on the rubbers (ooo err) will help also.
NNNooooooooo, any petroleum based products will rot the seals ...

M
Some sites say that WD40 will also rot the seals as it is petrolium based?

One site even said use brake fluid!!!!!!!!!!!!!!!! (Wouldn't this strip all the paint from around the doors?)

Has anyone ever tried using Silicone lubricant spray for this job? I already have some in the garage.

FreeLitres

Original Poster:

6,059 posts

179 months

Tuesday 16th November 2010
quotequote all
  • UPDATE *
So, yesterday morning my doors were iced shut in the morning frost.

I opted for the "3-in-1 Silicone Spray" approach. I sprayed some on to a paper towel and wiped this along the rubber door seals of the driver’s door. My first observation was the amount of grime this lifted off the seals!

Anyway This morning there was a heavy frost again (worse than yesterday's).

Door opened first time with no problems at all!!!!

I totally recommend a quick wipe of Silicone Spray around the seals if you suffer from frozen doors.

tezzer

983 posts

188 months

Tuesday 16th November 2010
quotequote all
Park inthe garage. Simples xx

FreeLitres

Original Poster:

6,059 posts

179 months

Tuesday 16th November 2010
quotequote all
tezzer said:
Park inthe garage. Simples xx
And leave Mr Tiv out in the cold? No way!

wink

Galsia

2,171 posts

192 months

Tuesday 16th November 2010
quotequote all
tezzer said:
Simples
Please don't do that...

Big Rod

6,206 posts

218 months

Tuesday 16th November 2010
quotequote all
I had the stuck door problem this morning.

Nothing would budge either of them, (semi pillared doors.)

They were at the stage where I'd released the catch but they were stuck solid.

So I opened the boot, slammed it shut and both doors popped open! cool

I'm prefering the silicon grease approach though, might nip down to Hellfrauds after work!

Dr Derek Doctors

8,422 posts

195 months

Tuesday 16th November 2010
quotequote all
If you have a st car like mine... just kick the door in as hard as possible, it forces the door into 'overclose' and breaks the ice seal. Easy

PAULJ5555

3,554 posts

178 months

Tuesday 16th November 2010
quotequote all
Stu R said:
Doesn't leave streaky grease all over the place.
Leave Streaky out of this its not his fault!!!!!!!!!

FreeLitres

Original Poster:

6,059 posts

179 months

Tuesday 16th November 2010
quotequote all
Dr Derek Doctors said:
If you have a st car like mine... just kick the door in as hard as possible, it forces the door into 'overclose' and breaks the ice seal. Easy
I wonder how you discovered that solution hehe

CO2000

3,177 posts

211 months

Tuesday 16th November 2010
quotequote all
I have the bloomin opposite problem, my X5 doors open but then bounce back when shutting !

The lock latch sticks with the cold but a good spray with WD40 sorts it out.

Monkeylegend

26,582 posts

233 months

Tuesday 16th November 2010
quotequote all
You could always hire Michael Caine but he might make a bit of a mess.