BMW Z3 with Ferrari 250 SWB kit
Discussion
pingu393 said:
I ordered 2x VENT6 from carbuilder yesterday afternoon, and they were delivered at 11am this morning. Great service - and great looking magazine with lots of Gucci kit to drool over .
I'm going to go without the central vents, but I'll add a VENT6 at each side. I'll need to block some of the central vent trunking, or there will be no flow out of the sides. I may attempt to redirect the remaining central flow away from the back of the gauges. I'm also considering adding the permanent side window vents (they are fed from the footwell vent). A slight problem with that last one is that I've lost the trunking for one side .
Interesting thread stillI'm going to go without the central vents, but I'll add a VENT6 at each side. I'll need to block some of the central vent trunking, or there will be no flow out of the sides. I may attempt to redirect the remaining central flow away from the back of the gauges. I'm also considering adding the permanent side window vents (they are fed from the footwell vent). A slight problem with that last one is that I've lost the trunking for one side .
Are the centre vents fresh air?
saaby93 said:
All the air coming into the cabin comes through the heater / cooler. I've had another look at the car, and the sidewindow venting comes from the windscreen venting, not the footwell venting.Crap video...
https://youtu.be/IxiPnHhItQA
pingu393 said:
saaby93 said:
All the air coming into the cabin comes through the heater / cooler. I've had another look at the car, and the sidewindow venting comes from the windscreen venting, not the footwell venting.Crap video...
https://youtu.be/IxiPnHhItQA
https://youtu.be/kXaEYnSRRWU
jeff666 said:
wow, thats a lot... maybe because they are making some special ones with those ferrari engines, those BMW base cars also are in the lift and this one is just a 2.8 with original interior/dash.Forums | Kit Cars | Top of Page | What's New | My Stuff