BMW 325i Touring / Resto
Discussion
The welds aren't as tidy as I'd like, but when youre welding 1.2mm steel together with a MIG, it tends to blow through on occasion, you have to pulse the weld to get it to fuse right.
Unless you can do better, why comment?
Got good penetration cause that above fact.
Anycase, front brakes took a lot more to sort including making a new hard line from the ABS to the front right
Tomorrow is just new pads and discs on the back and adjust the damned handbrake
Unless you can do better, why comment?
Got good penetration cause that above fact.
Anycase, front brakes took a lot more to sort including making a new hard line from the ABS to the front right
Tomorrow is just new pads and discs on the back and adjust the damned handbrake
Wow, been a while since i updated this.
This weekend was spent giving the car it's cam belt and water pump service.
Traced an oil leak to a perished sump gasket, which I'm going to have to sort out
Also replaced the fuel filter and a perished fuel hose.
There will be another update with the car.. brand new parts that'll change the look of the car and should resolve a few issues are coming soon.
This weekend was spent giving the car it's cam belt and water pump service.
Traced an oil leak to a perished sump gasket, which I'm going to have to sort out
Also replaced the fuel filter and a perished fuel hose.
There will be another update with the car.. brand new parts that'll change the look of the car and should resolve a few issues are coming soon.
Well, another year and another MOT test rolled up.
After having to spend a bit of time adjusting the handbrake, passed pretty much as is, though the exhaust is probably not long for this world.. .good excuse to look into this
Also, managed to break one of my keys, so having gone to the dealers and queried, turns out they still have the codes for the keys, so had 2 new ones made up.. amazingly they worked, the car has still got all it's original locks
After having to spend a bit of time adjusting the handbrake, passed pretty much as is, though the exhaust is probably not long for this world.. .good excuse to look into this
Also, managed to break one of my keys, so having gone to the dealers and queried, turns out they still have the codes for the keys, so had 2 new ones made up.. amazingly they worked, the car has still got all it's original locks
And the car is now up for sale
http://www.pistonheads.com/classifieds/used-cars/b...
Would like to see this go to a good home.
http://www.pistonheads.com/classifieds/used-cars/b...
Would like to see this go to a good home.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff