Magnum's Supercharged Mk1 Eunos
Discussion
[Photobucket have screwed this thread unfortunately. I have replaced some pics]
The Red Baron has been on the go since early ’09 when I got my first house with a decent sized garage. When we got the house I was still very much enjoying my Clio 182 (still miss it )…
…but fully recognised my manly duty to occupy the garage with a project car The yawning empty space lasted about a month before being filled with a low mileage ’94 1.8 Eunos, riding high on standard suspension and 17 inchers! Let's Off-Road: As an added bonus, all four tyres were different makes and tread patterns
Replaced them with Rotas and T1Rs (all round): A nice lowering / stiffening with adjustable Koni Sports and the standard front lip reinstated:
Handling wise I’ve also added Hard Dog roll over hoops (which stiffen up the rear) and P5 chassis rails: Twin exhaust for noise, looks and because the existing one was rusty and shoddy:
Took it for a benchmark dyno. 131bhp / 115 lb.ft so pretty bang-on the factory figures. Then I got my mitts on this little tinker…
[supercharger]
…so got busy under the bonnet. A fair bit of time, cash, stress and self-education later it looked a bit like this:
Goodies include:
Eaton M45 supercharger
LC-1 wideband
Megasquirt ECU
Supra injectors
Mishimoto rad (OE rad blew in spectacular fashion nearly taking my face off )
T R Lane mounting brackets
Home brew inlet and BMW Mini bypass valve
(also EBC discs and pads, braided brake hoses and a SPEC clutch)
Then took it to John Sleath Racing Cars for mapping wizardry. John’s a top bloke and really knows his onions. I’d totally recommend him:
This resulted in 173 bhp and this noise:
Only running light boost (4 psi) and currently no intercooler so the figures were close to what I was expecting.
Inside, I’ve spruced things up with a Nardi Wheel and JVC speakers / DAB head unit.
When it’s in one piece and road worthy it’s a joy to drive. I’m not delusional and I know it’s no rocket ship but it certainly surprises a few in a straight line and the noise is always amusing. The stiffening has helped but it’s still a bit wobbly on broken surfaces. I’m no Mike Cross but the handling and grip seem spot-on (had a full Hunter set-up after the lowering). Always averages ~30 MPG which is nice!
Yes, I’ve probably spend an irrational amount on it but I see it as a hobby rather than a car. All miles I do in it are for fun as I’ve got a bike and a trusty 190E for normal duties. What I spend on both cars is less than half the depreciation on one newish dull box-on-wheels. It does make me chuckle when owners of said boxes think I’m a flash git with ‘a Merc and a sports car’
I’ve taken it to many a North East PH drive-out around Northumberland, the Pennines and the Scotland trip. All great fun with a quality mix of cars and people (rained a lot though).
Updates for Oct 2020 -----
Hope you like but feel free to say if you don’t! Ed
The Red Baron has been on the go since early ’09 when I got my first house with a decent sized garage. When we got the house I was still very much enjoying my Clio 182 (still miss it )…
…but fully recognised my manly duty to occupy the garage with a project car The yawning empty space lasted about a month before being filled with a low mileage ’94 1.8 Eunos, riding high on standard suspension and 17 inchers! Let's Off-Road: As an added bonus, all four tyres were different makes and tread patterns
Replaced them with Rotas and T1Rs (all round): A nice lowering / stiffening with adjustable Koni Sports and the standard front lip reinstated:
Handling wise I’ve also added Hard Dog roll over hoops (which stiffen up the rear) and P5 chassis rails: Twin exhaust for noise, looks and because the existing one was rusty and shoddy:
Took it for a benchmark dyno. 131bhp / 115 lb.ft so pretty bang-on the factory figures. Then I got my mitts on this little tinker…
[supercharger]
…so got busy under the bonnet. A fair bit of time, cash, stress and self-education later it looked a bit like this:
Goodies include:
Eaton M45 supercharger
LC-1 wideband
Megasquirt ECU
Supra injectors
Mishimoto rad (OE rad blew in spectacular fashion nearly taking my face off )
T R Lane mounting brackets
Home brew inlet and BMW Mini bypass valve
(also EBC discs and pads, braided brake hoses and a SPEC clutch)
Then took it to John Sleath Racing Cars for mapping wizardry. John’s a top bloke and really knows his onions. I’d totally recommend him:
This resulted in 173 bhp and this noise:
Only running light boost (4 psi) and currently no intercooler so the figures were close to what I was expecting.
Inside, I’ve spruced things up with a Nardi Wheel and JVC speakers / DAB head unit.
When it’s in one piece and road worthy it’s a joy to drive. I’m not delusional and I know it’s no rocket ship but it certainly surprises a few in a straight line and the noise is always amusing. The stiffening has helped but it’s still a bit wobbly on broken surfaces. I’m no Mike Cross but the handling and grip seem spot-on (had a full Hunter set-up after the lowering). Always averages ~30 MPG which is nice!
Yes, I’ve probably spend an irrational amount on it but I see it as a hobby rather than a car. All miles I do in it are for fun as I’ve got a bike and a trusty 190E for normal duties. What I spend on both cars is less than half the depreciation on one newish dull box-on-wheels. It does make me chuckle when owners of said boxes think I’m a flash git with ‘a Merc and a sports car’
I’ve taken it to many a North East PH drive-out around Northumberland, the Pennines and the Scotland trip. All great fun with a quality mix of cars and people (rained a lot though).
Updates for Oct 2020 -----
Hope you like but feel free to say if you don’t! Ed
Edited by T S Magnum on Thursday 22 February 08:30
Edited by T S Magnum on Saturday 3rd October 14:40
Ta very much.
I've made a rod for my own back with the large rad making IC pipework tricky (as I understand it). Enjoying it as it is for now anyway. Also may start restraining the spending to save for the next project, whatever that may be. Saying that, I am considering a full respray so who knows!
I've made a rod for my own back with the large rad making IC pipework tricky (as I understand it). Enjoying it as it is for now anyway. Also may start restraining the spending to save for the next project, whatever that may be. Saying that, I am considering a full respray so who knows!
Edited by T S Magnum on Thursday 26th July 12:13
T S Magnum said:
Ta very much.
I've made a rod for my own back with the large rad making IC pipework tricky (as I understand it). Enjoying t as it is for now anyway. Also may start restraining the spending to save for the next project, whatever that may be. Saying that, I am considering a full respray so who knows!
Good for you, do what pleases you!I've made a rod for my own back with the large rad making IC pipework tricky (as I understand it). Enjoying t as it is for now anyway. Also may start restraining the spending to save for the next project, whatever that may be. Saying that, I am considering a full respray so who knows!
Cracking car.
Ta. It's an IL Motorsport 'zorst. The one from MX5Parts website. Crazy value and good quality.
Probably sounds obvious but I've done my research and tried to hit the value verses quality sweet-spot with each component, i.e. not always the very best quality but very good quality for the money from established suppliers.
Probably sounds obvious but I've done my research and tried to hit the value verses quality sweet-spot with each component, i.e. not always the very best quality but very good quality for the money from established suppliers.
This thread is relevant to my interests
Nice car. Thinking of doing this myself
Was the charger bolt on with the TR Lane bits or did anything need trimming?
I guess now with the big rad its not possible to do this? --> http://media.photobucket.com/image/recent/derber38...
Nice car. Thinking of doing this myself
Was the charger bolt on with the TR Lane bits or did anything need trimming?
I guess now with the big rad its not possible to do this? --> http://media.photobucket.com/image/recent/derber38...
Thanks all.
Yep, the wheels are like Minilites but with a 'sharper' ridge on the spokes.
Cheers for the pic, demonstrates the issue well although I'm sure there's ways and means around it.
The T R Lane bits required a fair bit of modification unfortunately. Caused a few months of SC belt alignment woes last year before I worked out what was wrong. A bit disappointing for not-especially-cheap professionally fabricated parts. Seems to be sorted now though
Yep, the wheels are like Minilites but with a 'sharper' ridge on the spokes.
Cheers for the pic, demonstrates the issue well although I'm sure there's ways and means around it.
The T R Lane bits required a fair bit of modification unfortunately. Caused a few months of SC belt alignment woes last year before I worked out what was wrong. A bit disappointing for not-especially-cheap professionally fabricated parts. Seems to be sorted now though
T S Magnum said:
Thanks all.
Cheers for the pic, demonstrates the issue well although I'm sure there's ways and means around it.
I wonder if you could do the coolant reroute which puts the thermostat on the back of the engine which in turn would make a little more room at the front of the engine for a barrel style chargecooler perhaps? Wouldnt need to be massive, nor would the coolant radiator.Cheers for the pic, demonstrates the issue well although I'm sure there's ways and means around it.
T S Magnum said:
The T R Lane bits required a fair bit of modification unfortunately. Caused a few months of SC belt alignment woes last year before I worked out what was wrong. A bit disappointing for not-especially-cheap professionally fabricated parts. Seems to be sorted now though
That's unfortunate, I had it in my head I'd be able to do this on my driveway without any modification/fabrication. Hmm Please don't be put off! I still did it on my drive. Modifications were to the T R Lane parts not on the car (other than chopping off some unused heat-shield brackets. Required grinder and mate with a weld-set. Prior to T R Lane, I tried some home brew brackets from a guy off Mx5Nutz - these were garbage.
Ninety percent of the battle was working out what was causing the gradually increasing misalignment of the belt (followed by it making a bid for freedom across the engine bay and being lunched by various moving parts!).
Ninety percent of the battle was working out what was causing the gradually increasing misalignment of the belt (followed by it making a bid for freedom across the engine bay and being lunched by various moving parts!).
It's the unclassified (obviously) road that runs across the Isle of Skye just North of Uig. Utterly stunning party of the world. The hairpin at the bottom of the picture was used by the EVO team for the ECOTY group shot a while back so it might look familiar.
Copyright EVO Magazine etc.
Copyright EVO Magazine etc.
Edited by T S Magnum on Monday 30th July 12:06
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff