My Mk1 Focus RS with a twist
Discussion
Cheers for all the comments =)
Spec wise with the engine
Cosworth Pistons
PEC rods
1.8 n/a inlet cam
vernier pullys (propper pullys)
uprated valve springs
Gen2 K&N
Tubi mani JEK FMS Rep
GT2876r
Forge actuator
Forge recirc
full milek exust
FMIC
Blitz boost controller
Custom swril pot
Bosch 044 fuel pump and in line filter
All airoquip connections
Its due to be live mapped with a few weeks and is expected to make over 400bhp
As for the interior i have Recaro CS's in the front and the rest is being change to suit the curren look of the car... also it will soon be featured in 'Fast Ford' magazine which will be cool as i've never had a car featured before...
Spec wise with the engine
Cosworth Pistons
PEC rods
1.8 n/a inlet cam
vernier pullys (propper pullys)
uprated valve springs
Gen2 K&N
Tubi mani JEK FMS Rep
GT2876r
Forge actuator
Forge recirc
full milek exust
FMIC
Blitz boost controller
Custom swril pot
Bosch 044 fuel pump and in line filter
All airoquip connections
Its due to be live mapped with a few weeks and is expected to make over 400bhp
As for the interior i have Recaro CS's in the front and the rest is being change to suit the curren look of the car... also it will soon be featured in 'Fast Ford' magazine which will be cool as i've never had a car featured before...
jeevescat said:
Mine is completely standard, and that's the way I like 'em.
Until now, that is fantastic!!!!!!
lol... she is still blue @ hert... yea i have alot of enthusiast that love the std look (which i do too) say they really like the car lol..Until now, that is fantastic!!!!!!
Forgot to add its got custom brake setup consisting of Mitsubish Evo front calipers and 360mm VW Pheaton front dicks and custom caliper brakets =)
wackojacko said:
Very nice, shame you didn't get the seems wrapped liek the pic of the boot you can see the blue through panel gap.... may just be me, it would annoy the hell out of me.
lol forgot to add they are going to be wrapped before the mag Feature the door shuts and A-posts are all wrapped.. the company that did it now want to make it look like a complete colur changeSTash07 said:
Very nice mate looks quite mean and loving the spec sheet you've got going on there ( 400bhp )
I see you've got a red reverse light instead off the usual clear fog light change, will this mod pass an MOT as i was thinking of doing this on my red ST.
Or have you got your reverse lights in the clusters now?
Cheers bud, i see every1 wsa going for the twin reverse lights so wanted to go down a different route lol (plus it was 99p of ebay lol).. you don't actually need a reverse light for an mot i don't think lol..... but the reverse lights could easily be plumbed into the clusters i suppose =)I see you've got a red reverse light instead off the usual clear fog light change, will this mod pass an MOT as i was thinking of doing this on my red ST.
Or have you got your reverse lights in the clusters now?
HedgehogFromHell said:
I've seen this car before...
Must admit every time i see RS in this colour it makes me consider it more and more!!
Gotta love a bit of SCC Performance work on Foci!!
340S SCC by Co1856, on Flickr
Yea Rob and his team know there stuff when it comes to fords thats for sure... and i love his Mk2 FRS its ggaaawwwjussss lol and them mk2 sound sweet gotta love the pops n bangs they make!!!Must admit every time i see RS in this colour it makes me consider it more and more!!
Gotta love a bit of SCC Performance work on Foci!!
340S SCC by Co1856, on Flickr
lol cheers for all the comments both good and not so good... but i would defo not descibe it as a 'Halfords look car' pmsl.... as said its all very easy to get her former glory.... i just fancied a change from the 'norm' lol..
The wrap was done by a company called 'Legend Vehicle Specialists Ltd' there external wraps start from £800+vat
The seats are out of a corsa VXR i got hold of them at a decent price and always thought the std seating position to be too high?? these have a much lower seating position.. ( i still have the std interior to go back in when it goes back to the blue =)
Pics of mine and the Mk2
The car is on compamotive MO6s in these pics
And a little pic of the fuel setup to cope with the hike in power once mapped
The wrap was done by a company called 'Legend Vehicle Specialists Ltd' there external wraps start from £800+vat
The seats are out of a corsa VXR i got hold of them at a decent price and always thought the std seating position to be too high?? these have a much lower seating position.. ( i still have the std interior to go back in when it goes back to the blue =)
Pics of mine and the Mk2
The car is on compamotive MO6s in these pics
And a little pic of the fuel setup to cope with the hike in power once mapped
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff