Tuscan metal undertrays
Discussion
You can try the breakers - TVR Glen or Steve Strange. Not sure if they are different to the Tam, Sag or T350. Have you tried Motaclan for them. I have vague recall of searching through their parts recently and seeing them [listed] for the Tam. Might have been Racetech.
Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.
Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.
Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.
Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.
mk1fan said:
You can try the breakers - TVR Glen or Steve Strange. Not sure if they are different to the Tam, Sag or T350. Have you tried Motaclan for them. I have vague recall of searching through their parts recently and seeing them [listed] for the Tam. Might have been Racetech.
Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.
Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.
Thanks for the info, i'm trying to buy new or get some made as my car is having a body off restoration and it would be nice to have new ones.Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.
Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.
None of the TVR parts suppliers have them in stock.
Motaclan are showing them as in stock.
https://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
https://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
Basil Brush said:
Motaclan are showing them as in stock.
https://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
Great, thanks matehttps://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
Basil Brush said:
Motaclan are showing them as in stock.
https://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
Thanks mate, i ordered them last nighthttps://motaclan.com/product/stiffening-plate-tran...
https://motaclan.com/product/stiffening-plate-unde...
Gassing Station | Tuscan | Top of Page | What's New | My Stuff