|
art nouveau
Original Poster
53 posts
26 months
|
I need a set of "maintenance wheels" for my Tuscan - something I can use to move the car around in the garage and when carrying out maintenance without resorting to expensive alloys.
THe Tuscan wheels are 16 inch (7-spoke) aluminium alloy wheels fitted with 225/50/ZR16 tyres to the front and 16 inch (7-spoke)aluminium alloy wheels fitted with 225/55/ZR16 tyres to the rear. THe wheels are fitted to the hub with 5-wheel nuts per wheel.
I assume the hub assemblies are from a manufacturer like Ford or Rover, rather then being a specific TVR casting. Therefore a large number of "maintenance wheels" should be available.
I have discovered the Kia Sedona wheels fit, however I am having trouble tracking down a set "close to home".
Has anyone come across this before, and can anyone help.
art nouveau
|
|
|
S6 Devil
1,089 posts
60 months
|
|
|
Basil Brush
2,648 posts
90 months
|
I understand the hubs are from a Jeep Cherokee, but the wheel stud pattern (5 x 114.3) is shared with a number of japanese cars.
|
|
|
TheGroves
11 posts
16 months
|
I have a set of 18" spiders which I have recently relaced with a new set. One of the rears has a very slight buckle. All four would refurb up brilliantly if you wanted to recoup costs when you are done.
Mike
|
|
Gassing Station | Tuscan | Top of Page
