Cerbera Parts Suppliers
Discussion
I'll keep updating when I get more of a chance.
The plan was to slightly modify the Cebera register heading at the top of the page into something like "Important Information for Cerbera Owners"
And incorporate it into that.
I'd like to update the parts bit too, and try and keep things tidy.
If anyone knows any online parts suppliers, please feel free to update. Has Joo got a shop back up and running yet?
And incorporate it into that.
I'd like to update the parts bit too, and try and keep things tidy.
If anyone knows any online parts suppliers, please feel free to update. Has Joo got a shop back up and running yet?
More vital information to keep in one place 
ridds said:
Here you go people.
If your starter screeches you need to replace this part.
Starter Gear
This is the Bendix with pre-engagement system as fitted to our starters.
Usually a bush with this unit collapses allowing the rear gear to spin without engaging on the flywheel.
It's a simple case of 4 small screws in the front plate that retain the unit in place. Remove, clean out old grease. Put some fresh in and then refit.
Ensure that the bolts are tight as if they fall out they fall into your clutch!
If your starter screeches you need to replace this part.
Starter Gear
This is the Bendix with pre-engagement system as fitted to our starters.
Usually a bush with this unit collapses allowing the rear gear to spin without engaging on the flywheel.
It's a simple case of 4 small screws in the front plate that retain the unit in place. Remove, clean out old grease. Put some fresh in and then refit.
Ensure that the bolts are tight as if they fall out they fall into your clutch!
Whirlwind Induction system etc. from http://www.kitsandclassics.co.uk/
Gassing Station | Cerbera | Top of Page | What's New | My Stuff