Just bought a jigsaw...

[TT Tim]

...anyone know how to put it back together?



Tim

[shadowninja]

lift the boot lid up and you'll be fine

[byker28i]

Start with the engine crane

[byker28i]

You need the engine manual
http://cgi.ebay.co.uk/TVR-Cerbera-4-5

[malman]

Had a quick look at that pic and I think you're missing a widget from that grommet hole on the right!

[bob1179]

Be sure not to dislocate the flangle hoops, you could be in big trouble if you do that.

Good luck on putting it all back together!

Edited by bob1179 on Sunday 25th March 10:49

[mikesr]

Those wheels you have attached to the bits of red chassis seem a little smaller than standard

[medieval]

I think the bit on the tailgate goes on the top, Tim.

Its the only bit I recognise

[dilbert]

TT Tim said:

...anyone know how to put it back together?



Tim

I don't know, but I'd say that it's deffo at the wrong end of the car at the moment!

[Guillotine]

I nearly bought that one Tim...kinda glad I didn't now!

[TT Tim]

Guillotine said:

I nearly bought that one Tim...kinda glad I didn't now!

It's not that bad, I've put most of the bits together to see what needs buying/sorting. It's now tucked away in my very overcrowded garage!



Will strip it all down again, and rebuild at the beginning of May ready to go in my car middle of the month.

Tim

[Mr Jenks]

I just zoomed in to have a good look at the bits. Bad news mate,
The huckle f*ckle valve is missing and the masturbating clacker`s knackered. Being as they are both made of unobtanium I reckon you`re in trouble with that one.
Dave

Edited by Mr Jenks on Sunday 25th March 19:45

[southendpier]

Mr Jenks said:

I just zoomed in to have a good look at the bits. Bad news mate,
The huckle f*ckle valve is missing and the masturbating clacker`s knackered. Being as they are both made of unobtanium I reckon you`re in trouble with that one.
Dave

Edited by Mr Jenks on Sunday 25th March 19:45

[jesfirth]

looks a bit like mine-was delivered today!!!

should be back and running next week

[Julian64]

Is that the 4.2 bottom end?

[TT Tim]

Julian64 said:

Is that the 4.2 bottom end?

Yep, has tuscan racer 4.5 heads but the rest is 4.2.

Will build up with a pair of clatter cams, but other than that it should remain standard.

Was thinking about going the whole hog and dry sumping, but have decided on an Accusump instead.

Thinking of which, anyone got an early 4.2 sump they want shot of, I'm after one with rear dipstick?

Tim

[Julian64]

Out of interest I know you have a set of standard 4.2 heads. You couldn't tell me what the difference is?

[TT Tim]

Julian64 said:

Out of interest I know you have a set of standard 4.2 heads. You couldn't tell me what the difference is?

I'll be honest, at the moment - no. I'm not sure what, if any, differences there are.

I'm pulling my new engine apart again next month so will see what I find.

Tim

[jonnyw]

There are some mangalesed unobtaniuam parts down the Lavant straight that will look at home in the boot of Rangy!

[jesfirth]

Tim,

try plastic man he has quite a few spare cerb bits

Jes