Coolant capacity
Discussion
Anyone know the capacity of the cerbera coolant system? I am about to replace the coolant with this stuff...
http://www.evanscooling.com/html/home1.htm
http://www.evanscooling.com/html/home1.htm
The capacity is 12 Litres...that Evans system is probably pretty good stuff, but personally I wouldn't think it is worth it, too much hassle whenver you have to drain the coolant etc etc. Good old H20, or distilled water if you are really fussy, with a decent anti freeze is plenty good enough.
Edited by JensenA on Thursday 27th March 19:38
I swear by motul inugel, made a shocking change to the cerbs temps, on a steady speed motorway trip the temp stayed far lower after changing to the motul inugel, again its not cheap though!
http://www.opieoils.co.uk/p-903-motul-inugel-optim...
£13.50 for 5 litres
http://www.opieoils.co.uk/p-903-motul-inugel-optim...
£13.50 for 5 litres
AlVal said:
I swear by motul inugel, made a shocking change to the cerbs temps, on a steady speed motorway trip the temp stayed far lower after changing to the motul inugel, again its not cheap though!
http://www.opieoils.co.uk/p-903-motul-inugel-optim...
£13.50 for 5 litres
Thats not too bad, looks good stuff and a darn site cheaper than 120 quid.http://www.opieoils.co.uk/p-903-motul-inugel-optim...
£13.50 for 5 litres
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



