Red Rose Badge
Discussion
A couple of weeks ago there was a thread on the go about Red Rose badges. I suggested I could come up with a design for one, and produce them too. Well, as ever it has taken longer than planned to do it , but here is my proposal
As you can see, I am suggesting a badge which fits alongside the side indicator repeaters on the front wings. Naturally, these would be supplied as a handed pair, one for each side. I will do a rear version too, but I need to take a closer look at the rear of a Cerbera to finalise it (I have a Griff)
These will be in the form of a self adhesive domed badge, printed in black and metallic red onto chrome. I am gauging interest at this point, but will be able to do a short run quite quickly if there is a demand fro a few sets. Price will be in the region of £15 to £20 inc postage for a set of 3.
Jon H
>>> Edited by jon h on Saturday 28th February 16:56
As you can see, I am suggesting a badge which fits alongside the side indicator repeaters on the front wings. Naturally, these would be supplied as a handed pair, one for each side. I will do a rear version too, but I need to take a closer look at the rear of a Cerbera to finalise it (I have a Griff)
These will be in the form of a self adhesive domed badge, printed in black and metallic red onto chrome. I am gauging interest at this point, but will be able to do a short run quite quickly if there is a demand fro a few sets. Price will be in the region of £15 to £20 inc postage for a set of 3.
Jon H
>>> Edited by jon h on Saturday 28th February 16:56
rods said:
Jon will they work on a T350,if they do i'll take a set.My T350 is having a red rose spec at the Factory at the moment.
Rob
Frankly, I overlooked the fact that it is not just Cerberas that have the Red Rose conversion. I assume thet the indicators are the same on all vehicles, but I will check., and attempt to make a universal fit.
Jon H
jon h said:
Well, it sort of fell down a hole really... but I have just bought a Cerb (not a RR) so perhaps I should pull my finger out and get them into production as I will have the correct side indicator shape to work from in the garage as of next week...
I will keep you posted.
Jon H
Great news Jon! I'm keen to have these for my new Tamora RR
Well, I have finally got round to doing this badge, thanks to a timely reminder from Blackmonday.
Final artwork is done and in production. I should have 20 sets in my hand within the next week or so. There are 3 badges in a set: 1 for each side, nesting up to the side repeater as per my original design, and a rear badge the same size as the Cerbera boot badge, so it can fit to the right of the numberplate for a balanced look. The rear badge says Red Rose on it in the correct font to match the model name on the standard boot badge. They will be in red and black on chrome, with a domed finish like the 45mm diameter PH badges Ted has in the PH shop at the moment. Price will be about £15.00 per set plus P&P, I think. I do not wish to break any posting rules... I will place an advert in the classified section when they are ready.
For all those who have expressed an interest in these in the past, sorry it took so long!
Jon H
Final artwork is done and in production. I should have 20 sets in my hand within the next week or so. There are 3 badges in a set: 1 for each side, nesting up to the side repeater as per my original design, and a rear badge the same size as the Cerbera boot badge, so it can fit to the right of the numberplate for a balanced look. The rear badge says Red Rose on it in the correct font to match the model name on the standard boot badge. They will be in red and black on chrome, with a domed finish like the 45mm diameter PH badges Ted has in the PH shop at the moment. Price will be about £15.00 per set plus P&P, I think. I do not wish to break any posting rules... I will place an advert in the classified section when they are ready.
For all those who have expressed an interest in these in the past, sorry it took so long!
Jon H
Finally!!! I have some badges if anyone is still interested.
Details in the classified section: www.pistonheads.com/sales/69264.htm
I have under written a small production run, but can easily get more made if there is a demand.
Sorry this took so long guys...
Jon H
Details in the classified section: www.pistonheads.com/sales/69264.htm
I have under written a small production run, but can easily get more made if there is a demand.
Sorry this took so long guys...
Jon H
Gassing Station | Cerbera | Top of Page | What's New | My Stuff