99 SP6, 43K for £6500....
Discussion
Am i getting my cerb's mixed up....thought this sold...?
http://www.pistonheads.com/sales/1247985.htm
Anyway...seems like a bargain?
http://www.pistonheads.com/sales/1247985.htm
Anyway...seems like a bargain?
its been boucing about for a while now, 11k a few months ago, i think its the same owner. you do get alot of timewasters out there though so i can understand their frustration.
i thought you couldn't get the gearbox all the way out unless the engine was removed though! or am i wrong? ifso 800 repair seems a little optamistic
i thought you couldn't get the gearbox all the way out unless the engine was removed though! or am i wrong? ifso 800 repair seems a little optamistic
Edited by al 350i on Thursday 5th November 15:31
I was just about to wade into a new post to ask whether this was the value it seemed...!
So, is the £800 for a new gearbox optimistic then? If it was £1500 all in and the engine was in good enough shape, then £8000 is pretty good still isn't it? Even for a SP6?
I actually don't think the interior looks that bad
So, is the £800 for a new gearbox optimistic then? If it was £1500 all in and the engine was in good enough shape, then £8000 is pretty good still isn't it? Even for a SP6?
I actually don't think the interior looks that bad

so the question that needs to be asked is will a 4.3 speed six cerb beat a 4.5? any one running one?
quite like the interior too, don't know what a gearbox rebuild is going to be but its a fairly common box so shouldn't be too bad maybe you could fit a 6th gear and crack the magic 200mph
to get the engine out is going to cost you about 1k at a garage but its only nuts and bolts so you could go DIY
quite like the interior too, don't know what a gearbox rebuild is going to be but its a fairly common box so shouldn't be too bad maybe you could fit a 6th gear and crack the magic 200mph

to get the engine out is going to cost you about 1k at a garage but its only nuts and bolts so you could go DIY
al 350i said:
so the question that needs to be asked is will a 4.3 speed six cerb beat a 4.5? any one running one?
quite like the interior too, don't know what a gearbox rebuild is going to be but its a fairly common box so shouldn't be too bad maybe you could fit a 6th gear and crack the magic 200mph
to get the engine out is going to cost you about 1k at a garage but its only nuts and bolts so you could go DIY
Don't know why I'm thinking this but isn't there something specifically difficult about getting a SP6 out of a Cerb...? I know its not impossible - obviously - but seem to remember it being moer difficult than a AJPV8...? Maybe my brains frazzled...need more coffee...quite like the interior too, don't know what a gearbox rebuild is going to be but its a fairly common box so shouldn't be too bad maybe you could fit a 6th gear and crack the magic 200mph

to get the engine out is going to cost you about 1k at a garage but its only nuts and bolts so you could go DIY
I dont understand all this engine out mallarky? my gearbox has been out 3 times since i bought my car (speed 6 also).
£800 to fit a replacement 2nd gear and referb the rest? can't see that being too much of a problem.
43k on a S6 though?? hmmm could be pushing it, but it might just be one of the good ones.
haggle for £6k and get a power 4.3 rebuild just for piece of mind, could have an extremely good car for £15k ish
£800 to fit a replacement 2nd gear and referb the rest? can't see that being too much of a problem.
43k on a S6 though?? hmmm could be pushing it, but it might just be one of the good ones.
haggle for £6k and get a power 4.3 rebuild just for piece of mind, could have an extremely good car for £15k ish
Gassing Station | Cerbera | Top of Page | What's New | My Stuff







