Changing oil but not filter?
Discussion
Hi, I have a trackday coming up soon and my oil level was not at max so I checked it with the dipstick and the oil is blackish. I was thinking rather than top it up I should change it. I last did the oil and filter about 4k miles ago. Do I need to change the filter aswel? It's a bh to get at behind the inlet manifold and last time I changed it it dumped a load of oil onto the engine before I could turn it right way up!
That Daddy said:
Personally hand tight is always enough,and using that chain wrench can weaken/cut the canister so be careful,worth checking that one
ridds said:
Yep hand tight.
Spin on until the seal touches then 3/4 of a turn from there. Put another 1.8 of a turn after that if you're not happy.
Never use a wrench or strap and always put oil on the seal. You'll neer get it off again especially if it's hard to get to. laugh
Spin on until the seal touches then 3/4 of a turn from there. Put another 1.8 of a turn after that if you're not happy.
Never use a wrench or strap and always put oil on the seal. You'll neer get it off again especially if it's hard to get to. laugh
Oh well at least I can be pretty sure the filter is not gonna fall off before I have to change it again!
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff