Corrado mirrors with fibreon adapters
Discussion
Hi chaps,
My Chimaera project was missing mirrors when I bought it. I've got hold of a set of Corrado mirrors and bought a set of mirror blocks from FIbreon. The mirror blocks need holes drilling for the wires to pass through, before I do it I thought I'd check this is where others have done it.
I'm guessing I need to drill a hole through the bottom here
![](https://thumbsnap.com/sc/15ebsCMC.jpg)
So that it comes out on the top somewhere round here
![](https://thumbsnap.com/sc/Y6Gxg93f.jpg)
My Chimaera project was missing mirrors when I bought it. I've got hold of a set of Corrado mirrors and bought a set of mirror blocks from FIbreon. The mirror blocks need holes drilling for the wires to pass through, before I do it I thought I'd check this is where others have done it.
I'm guessing I need to drill a hole through the bottom here
![](https://thumbsnap.com/sc/15ebsCMC.jpg)
So that it comes out on the top somewhere round here
![](https://thumbsnap.com/sc/Y6Gxg93f.jpg)
andrew_r said:
Does anyone have any of the Fibreon mirror adapters that you’re looking to sell? I’ve been trying to contact Fibreon to purchase a set but haven’t had any responses after multiple attempts. I’m wondering whether they’ve ceased trading.
Many thanks, Andrew
I might be fitting TT mirrors instead, I've bought some to have a play with. If I go with those I'll be selling my adapters.Many thanks, Andrew
Edited by andrew_r on Sunday 18th February 14:41
Gassing Station | Chimaera | Top of Page | What's New | My Stuff