LS" Billet Fuel Rails

[Yanayaya]

For cosmetic reasons only I'm looking to put a set of billet FAST Fuel rails into my Monaro however I've noticed that they all seem to be for the FAST intake as well. Does anyone know if these kits fit onto the stock intake?

[Mud_]

There are various fitting kits, LS1/LS6, LS2, etc. The LSXR is basically an LS2 intake, so that's the kit I used (although I ended up making my own brackets due to LS3 injectors). You'll also need a fuel fitting adapter ( talk to Gurmeet), and a crossover. It adds up, so expensive as bling goes. Sturdy documented fitting his FAST with rails, which should help.

AN fittings

[Drew SS]

I've a set of blue vortech rails I'd sell have no need for them these days

[jameshsv]

Be careful some billet fuel rail dont fit all that well if you pm gurmeet he can advise wisely

[Drew SS]

jameshsv said:

Be careful some billet fuel rail dont fit all that well if you pm gurmeet he can advise wisely

Cheap stuff usually doesn't guess that's why it's cheap

[jameshsv]

Drew SS said:

Cheap stuff usually doesn't guess that's why it's cheap

I think mine are holley or lingenfelter fuel rails

[Yanayaya]

These were the fellas I was looking at. It seemed like a job for winter because of the making of the crossover etc.

http://www.ebay.co.uk/itm/FAST-Fuel-Rails-Billet-A...

[Mud_]

FAST make a crossover for an easy life, not cheap though! It's the line from the bulkhead that you'll probably have to make.

[SturdyHSV]

They fit, but you may have to give the mounting brackets some love taps with a hammer to make sure the rails are held securely so as not to piss fuel all over your lovely hot engine bay whilst driving along.

[gsd2000]

the holley kits fit well, if you need any help with them let me know