Will 18" Rims Fit ?
Discussion
The problem here is going to be offsets. The 3.2 Carrera uses quite small offsets (around 10mm - 26mm) and most of the Porsche-specific alloys you will find will be much greater than that, to suit the later cars. You can, of course, use spacers to reduce the offset of the wheel but you'll need to know the exact dimensions of the wheel in question in order to do that.
Bear in mind that the standard wheels on the 3.2 were only 15" or 16" so you'll have to go for a severely reduced aspect ratio tyre to retain the same (or near) rolling radius.
I'm sure there are plenty of 3.2 owners who can advise better but my 864 is completely different I'm afraid.
Regards
Dave
Bear in mind that the standard wheels on the 3.2 were only 15" or 16" so you'll have to go for a severely reduced aspect ratio tyre to retain the same (or near) rolling radius.
I'm sure there are plenty of 3.2 owners who can advise better but my 864 is completely different I'm afraid.
Regards
Dave
Gassing Station | Porsche General | Top of Page | What's New | My Stuff