How much does anti-lag cost to install?
Discussion
can i get a reeeeeeee-build?
"bang-bang" anti lag keeps the turbo spinning by allowing combustion to occur in the manifold & turbo. This means even though the engine speed is dropping, there turbo is kept spinning very fast. Unsurprisingly this is not what turbos were designed for...
Not only does it make a LOT of heat, it can overspin your turbo.
"bang-bang" anti lag keeps the turbo spinning by allowing combustion to occur in the manifold & turbo. This means even though the engine speed is dropping, there turbo is kept spinning very fast. Unsurprisingly this is not what turbos were designed for...
Not only does it make a LOT of heat, it can overspin your turbo.
I run it on my Evo 9, and I also ran it on my old Evo 6 with no ill-effect. The trick is to use it only for a few seconds at a time.
You can't just fit anti-lag. You have to have a complete aftermarket ECU fitted instead. For both cars I chose the MoTeC M800.
For road cars you only have it set up very mildly. An aggressive setup will eventually do damage, but for this yo would have to have a throttle kicker. Don't bother on the road.
Personally I LOVE anti-lag. The noise is just something else.
You can't just fit anti-lag. You have to have a complete aftermarket ECU fitted instead. For both cars I chose the MoTeC M800.
For road cars you only have it set up very mildly. An aggressive setup will eventually do damage, but for this yo would have to have a throttle kicker. Don't bother on the road.
Personally I LOVE anti-lag. The noise is just something else.
Gassing Station | Japanese Chat | Top of Page | What's New | My Stuff