s2000 steering itself

s2000 steering itself

Author
Discussion

Gassey

Original Poster:

2,152 posts

218 months

Thursday 13th September 2007
quotequote all
Had four new alloys fitted under warranty (due to specs of corrosion) and at the same time had two new rear tyres. Driving over to my girlfriends placed doing a sensible rate down the dual carridge way, and the car went all over the place, the rear went super light. Almost felt like the rear wheels were steering. Stopped and took a look at the wheels, thinking maybe they had screwed the wheel nuts tight enough, but they were all tight.

Anyone got any ideas?

Obviously going to take the car back to honda tomoro

Bibbs

3,733 posts

211 months

Friday 14th September 2007
quotequote all
Get the alignment sorted. It's all fairly adjustable.

And I don't mean a quick fit alignment. I mean a proper full on Geometry one.

As stock they are setup rubbish.

MrFlibbles

7,692 posts

284 months

Friday 14th September 2007
quotequote all
Where is a good place to get the geometry set up?

Does this sort the tendency to try and kill me at high speed?

MrF

WRumbled

392 posts

228 months

Friday 14th September 2007
quotequote all
http://www.centergravity.co.uk/

He's well regarded on s2ki. Has done loads of cars, including mine.

Well worth doing.

S2K

71 posts

235 months

Saturday 15th September 2007
quotequote all
Check your tyre pressures first. Having new allys shouldn't affect your geo. I assume they are stock wheels as they have been done under warranty, the only things that have been disturbed are your tyres.

Gassey

Original Poster:

2,152 posts

218 months

Saturday 15th September 2007
quotequote all
Thanks folks, i will check the tyre pressures tomorrow. The car is going back on Tuesday to Honda for them to take a look.

EvoBarry

1,903 posts

266 months

Sunday 16th September 2007
quotequote all
Could it just be the new rear tyres not being scrubbed in yet? I know my ITR feels very strange on new tyres for a good 100 miles or so... not saying a geo isn't worth the money, ust offering alternative suggestions as to the cause.

havoc

30,092 posts

236 months

Tuesday 18th September 2007
quotequote all
1) Tyres not scrubbed in;
2) Tyres fitted incorrectly or at wrong pressure;
3) They've knocked something and sent the geo out when fitting a rear alloy;
4) They put tyre dressing on the treads to make it look nice; wink
5) You drove over something like diesel / tyre dressing which adhered to a tyre.

Gassey

Original Poster:

2,152 posts

218 months

Tuesday 18th September 2007
quotequote all
havoc said:
1) Tyres not scrubbed in;
2) Tyres fitted incorrectly or at wrong pressure;
3) They've knocked something and sent the geo out when fitting a rear alloy;
4) They put tyre dressing on the treads to make it look nice; wink
5) You drove over something like diesel / tyre dressing which adhered to a tyre.
Most likely 1,2 or 3. Its back at honda now and ive got a lovely civic diesel for now wink

edited to thank havoc for thoses suggetions thumbup

Edited by Gassey on Tuesday 18th September 22:41

Asterix

24,438 posts

229 months

Wednesday 19th September 2007
quotequote all
I'd have to go with TPs - it only needs a few psi out and you will notice it - especialy under braking and teh transition from off to on - or - on to off throttle in a straight line.