280i ford V6 Quesi
Discussion
My car runs very well but I want to check that the timing is ok.
I have the manuals that were produced for the US market and SH's Bible, but I cannot make out the range of the timing marks. I assume it starts at TDC. With UK idle no vac being 12 btdc and US being 9 btdc and the total advance being 21 - 33 btdc (weights and Vac)I'm quessing the full range of the timing marks is 33 degrees.
That would be sort of logical as on a larger pulley 1 degree eqauls about 1 mm and it's about an inch and a bit.
If someone knows what each notch equals I could stop guessing!
Thanks
Jeff
I have the manuals that were produced for the US market and SH's Bible, but I cannot make out the range of the timing marks. I assume it starts at TDC. With UK idle no vac being 12 btdc and US being 9 btdc and the total advance being 21 - 33 btdc (weights and Vac)I'm quessing the full range of the timing marks is 33 degrees.
That would be sort of logical as on a larger pulley 1 degree eqauls about 1 mm and it's about an inch and a bit.
If someone knows what each notch equals I could stop guessing!
Thanks
Jeff
Gassing Station | Wedges | Top of Page | What's New | My Stuff