Oil Pressure 1.6 K-Series

[freebee]

Thankyou its 2005!

[Red Seven]

Chrisp5782 said:

M12 if it's a post 2002 car I believe?

Mines a 2004 and it was an M12 to 1/8 BSP adaptor I needed.

To be more precise, it's M12 x 1.5

[Chrisp5782]

Red Seven said:

To be more precise, it's M12 x 1.5

Probably struggle to find anything that isn't - it's a standard metric thread.

[anonymous-user]

Chrisp5782 said:

Red Seven said:

To be more precise, it's M12 x 1.5

Probably struggle to find anything that isn't - it's a standard metric thread.

Not really, M12 can have a pitch of 1.25, 1.5 or 1.75.

1.75 is the coarse pitch and would normally be regarded as 'standard'. The others are fine pitches and used if the thread depth could be a problem.

[Chrisp5782]

REALIST123 said:

Not really, M12 can have a pitch of 1.25, 1.5 or 1.75.

1.75 is the coarse pitch and would normally be regarded as 'standard'. The others are fine pitches and used if the thread depth could be a problem.

I was referring to the application, you wouldn't use a coarse thread on a fluid application.

I wasn't really after an argument either.