Fuse layout help

[j3ffers]

New to this folder having very recently bought a Caterham, and had a fuse blow after using the wipers on the run to Goodwood for the SS. Now resolved by trial and error but thought I would throw out the pic of the fuse block to see if anyone has the same layout.

It's a 2014 Roadsport/Sigma. First pic shows my layout, second is the supposed Sigma layout from the 2014 build guide. Fuse K @ 15A for the Wash/Wipers was actually the middle red one on the left but: a) it's 10A, b) can't figure how it's position K?, c) as an aside there are no 20A fuses in the build guide, but 3 in my block (is middle bank spares?)

Anyone else have the same fuse block and mapped them out before I go trial and error?



Last pic is one from an old thread/older layout with some of the fuses combined:

[Trevor Conway]

Hi Jeffers,

I came across your post (Google search) when I was searching to find something help me identify the fuse layout on my 2018 Academy Car. I have the same fuse block as you and the same hopeless information in the manual. Did you ever find a layout diagram/map?

I'm about to go trail and error in the meantime as my instruments aren't working and all 7.5A fuses are OK.

Thanks
Trev

[j3ffers]

And stumbled over the reply by accident. I didn't I'm afraid. Thankfully the rest have held firm in the meantime.

One thing I was planning to do - still planning - was to get a load of the mini LED fuses and rip/replace on a like for like basis, so that at least when one goes I should be able to see it... A cheat outcome, and in reality I should test one by one, but didn't want to risk pulling something out I shouldn't when car was running or not... I'd class myself as a prudent amateur on the mechanics side in reality.