Custom Made Gear Knob Potential any interest?
Discussion
LeeT350c said:
Morning all.
If one of you could confirm the thread you would need and the gear pattern for the top I could look at this for you.
Cheers. Lee.
Ps The thread i have on my S is a standard ford M10 1.5mm, i believe this is consistent across the range unless a mod has been made... as for the gate pattern and flat top of the Chim and Griff style ball this is a must.. ;-)If one of you could confirm the thread you would need and the gear pattern for the top I could look at this for you.
Cheers. Lee.
Gents
To confirm we have 18 now but still not enough to make is commercially viable unless you all want to pay a slight premium... i'll leave this post open and keep and eye and when the numbers increase i will confirm the production.
In the meantime, LEET350c and i are in conversation about a possible alternative.. i will keep you posted...
Cheers Rich
To confirm we have 18 now but still not enough to make is commercially viable unless you all want to pay a slight premium... i'll leave this post open and keep and eye and when the numbers increase i will confirm the production.
In the meantime, LEET350c and i are in conversation about a possible alternative.. i will keep you posted...
Cheers Rich
Apologies for the delay Gents, I have been taking behind the scenes and the manufacturer is about to start on a prototype gear knob based on our spec, which he will send to me in the near future. When he does I'll post ia picture of it and ask for final numbers. We can then go ahead and order.
Thanks for the patience.
Cheers Rich
Ps he will the start investigating the design of the other items we have requested as well once this is out of the way..
Thanks for the patience.
Cheers Rich
Ps he will the start investigating the design of the other items we have requested as well once this is out of the way..
Trev - Noted and added...
QUICK UPDATE: First 10 have been made and are currently being etched.. will post a picture as soon as i get them... I'll offer them up in order of request to ensure fairness if that's OK with everyone but you shouldnt have to wait long in any case.. currently the cost is roughly around what we had estimated..
QUICK UPDATE: First 10 have been made and are currently being etched.. will post a picture as soon as i get them... I'll offer them up in order of request to ensure fairness if that's OK with everyone but you shouldnt have to wait long in any case.. currently the cost is roughly around what we had estimated..
Gentlemen, prepare yourselves... Xmas has come early...
Attached are the pictures of the OEM style Aluminum gear knob we promised with the S Series etched gate pattern... The one Lee has sent me fits perfect even to the depth of thread.. look fantastic and is as good if not better quality than the originals!! (Great Job Lee).
So as stated earlier, please confirm that you are still interested and wish to purchase one, we have 10 ready to and Lee is currently working on more as we speak. Price will be £25 + p&p... you wont be dissapointed.... first ten to pay gets those but dont worry the rest will be along very shortly....
Cheers Rich....
Attached are the pictures of the OEM style Aluminum gear knob we promised with the S Series etched gate pattern... The one Lee has sent me fits perfect even to the depth of thread.. look fantastic and is as good if not better quality than the originals!! (Great Job Lee).
So as stated earlier, please confirm that you are still interested and wish to purchase one, we have 10 ready to and Lee is currently working on more as we speak. Price will be £25 + p&p... you wont be dissapointed.... first ten to pay gets those but dont worry the rest will be along very shortly....
Cheers Rich....
Great! Will drop the list out shortly to confirm what i had... but your both on the list and both the first two lucky recipients!!
As for payment, i am assuming most if not all have Paypal so probably safer for all if we do it through that means.. and via a personal payment ;-) I'll double check this and will come back asap...
Rich
As for payment, i am assuming most if not all have Paypal so probably safer for all if we do it through that means.. and via a personal payment ;-) I'll double check this and will come back asap...
Rich
GEAR KNOB ORDER LIST - In order of request
Gents here is the current order list. Please confirm your ready to purchase and we will establish the best means of payment. Batch 1 will be supplied in order, but the rest should be with us very soon...
1. Knowler – Rich
2. 2. Loach1
3. 3. GriffinR – Rob
4. 4. GadgeS3c –
5. 5. Phillpot – Mike
6. 6. Party7
7. 7. JulesPrivate
8. 8. TonUpS2
9. 9. DellBoyH
10. 10. AndrewS2
11. 11. DaveM
12. Colley340 – Gareth
13. Nicecupoftea
14. KieS2
15. Scoobimax
16. Deadfast
17. Skinne01
18. Jay Jay Bee
19. TRMnoV
20. TrevS3c
21. Agent Okra – Via Gary GadgeS3c
IMPORTANT: Please confirm which model S you have, as the V8 we believe to have a different thread which will be done in a subsequent batch
Gents here is the current order list. Please confirm your ready to purchase and we will establish the best means of payment. Batch 1 will be supplied in order, but the rest should be with us very soon...
1. Knowler – Rich
2. 2. Loach1
3. 3. GriffinR – Rob
4. 4. GadgeS3c –
5. 5. Phillpot – Mike
6. 6. Party7
7. 7. JulesPrivate
8. 8. TonUpS2
9. 9. DellBoyH
10. 10. AndrewS2
11. 11. DaveM
12. Colley340 – Gareth
13. Nicecupoftea
14. KieS2
15. Scoobimax
16. Deadfast
17. Skinne01
18. Jay Jay Bee
19. TRMnoV
20. TrevS3c
21. Agent Okra – Via Gary GadgeS3c
IMPORTANT: Please confirm which model S you have, as the V8 we believe to have a different thread which will be done in a subsequent batch
Lol!!
I think thats because we had a conversation about you didnt want one then did so i must have taken you off then just added you back the bottom today.. not a problem though you can have my proof one if the other 10 havent turned up by the time i post them all out... ;-) its perfect and unused before you worry...
Cheers mate....
I think thats because we had a conversation about you didnt want one then did so i must have taken you off then just added you back the bottom today.. not a problem though you can have my proof one if the other 10 havent turned up by the time i post them all out... ;-) its perfect and unused before you worry...
Cheers mate....
Ok Chaps, Further update and PAYMENT
Spoke to the manufacturer (Lee/LeeB) and to save us all a lot of hassle and you guys any further expense he will take your orders and deal with the P&P... As such because i dont need to handle them and send them on again individually, I reckon your now looking at £25 incl P&P, one in the eye for the costly royal mail ;-)....
He has suggested that you simply contact him directly via PH (LeeB he is in this conversation string) or via l.gascoyne@btinternet.com, he will then log you on a spreadsheet and send out the knob once you have paid.
His Payment Methods are:
PayPal
Bank transfer
Personal cheque
Once you contact Lee he will send you the appropriate details for your payment.
Hope this all makes sense and your all happy with the knobs.... please let me know when you have them and what you think I'd be interested to know after all this hard work.....
Rich
Spoke to the manufacturer (Lee/LeeB) and to save us all a lot of hassle and you guys any further expense he will take your orders and deal with the P&P... As such because i dont need to handle them and send them on again individually, I reckon your now looking at £25 incl P&P, one in the eye for the costly royal mail ;-)....
He has suggested that you simply contact him directly via PH (LeeB he is in this conversation string) or via l.gascoyne@btinternet.com, he will then log you on a spreadsheet and send out the knob once you have paid.
His Payment Methods are:
PayPal
Bank transfer
Personal cheque
Once you contact Lee he will send you the appropriate details for your payment.
Hope this all makes sense and your all happy with the knobs.... please let me know when you have them and what you think I'd be interested to know after all this hard work.....
Rich
Knowler said:
Ok Chaps, Further update and PAYMENT
Spoke to the manufacturer (Lee/LeeB) and to save us all a lot of hassle and you guys any further expense he will take your orders and deal with the P&P... As such because i dont need to handle them and send them on again individually, I reckon your now looking at £25 incl P&P, one in the eye for the costly royal mail ;-)....
He has suggested that you simply contact him directly via PH (LeeB he is in this conversation string) or via l.gascoyne@btinternet.com, he will then log you on a spreadsheet and send out the knob once you have paid.
His Payment Methods are:
PayPal
Bank transfer
Personal cheque
Once you contact Lee he will send you the appropriate details for your payment.
Hope this all makes sense and your all happy with the knobs.... please let me know when you have them and what you think I'd be interested to know after all this hard work.....
Rich
FURTHER UPDATE:Spoke to the manufacturer (Lee/LeeB) and to save us all a lot of hassle and you guys any further expense he will take your orders and deal with the P&P... As such because i dont need to handle them and send them on again individually, I reckon your now looking at £25 incl P&P, one in the eye for the costly royal mail ;-)....
He has suggested that you simply contact him directly via PH (LeeB he is in this conversation string) or via l.gascoyne@btinternet.com, he will then log you on a spreadsheet and send out the knob once you have paid.
His Payment Methods are:
PayPal
Bank transfer
Personal cheque
Once you contact Lee he will send you the appropriate details for your payment.
Hope this all makes sense and your all happy with the knobs.... please let me know when you have them and what you think I'd be interested to know after all this hard work.....
Rich
If you wish to contact Lee via PH mail then its LeeT350c not LeeB as i had stated earlier... sorry about that....
Hi All...
Ive been meaning to respond to your kind words for a while and just got tied up. I am very pleased to hear that you all like them ;-)
As for me Lee is correct and i have unfortunately had to sell the car... gutted but its gone to a very good home... i shall be back but i also wanted to thank you all for the kindness shown and unconditional help.. brilliant forum brilliant people...
Cheers Rich
Ive been meaning to respond to your kind words for a while and just got tied up. I am very pleased to hear that you all like them ;-)
As for me Lee is correct and i have unfortunately had to sell the car... gutted but its gone to a very good home... i shall be back but i also wanted to thank you all for the kindness shown and unconditional help.. brilliant forum brilliant people...
Cheers Rich
Gassing Station | S Series | Top of Page | What's New | My Stuff