Also - these holes...

[tel595]

After putting the body back on the S today, I've noticed 4 holes in the floor, 2 each side just in front of the middle cross rail of the chassis about 6mm dia. Not easy to explain exactly where but you may see in the photo below. I can't remember if anything was bolted through them or not. Does anyone know?

[phillpot]

Seats ? but that's behind the crossmember




ETA no it's not seats, they are for two plastic studs to hold the carpet in place

Edited by phillpot on Tuesday 22 April 06:58

[Griffinr]

Deviating slightly from the subject, that looks an interesting exhaust arrangement, is it 2 into 1 and then into 2 again?
Rob

[phillpot]

Yes, the main box (to the right) is from a V8S but I found it too noisy, well more like a "drone" (funny, coz that's the only silencer on a V8) so a "Cherry Bomb" was dropped in in front of it.
Out of shot but in front of that is a home made Y piece to bring the shortened hockey sticks together.

Edited by phillpot on Tuesday 22 April 21:16

[tel595]

Thanks Mike, thought you'd have an idea.. Didn't want to fill them in if they were to be used

[phillpot]

No problem, It's the big one, forward off them that's the drain hole

[tel595]

phillpot said:

Yes, the main box (to the right) is from a V8S but I found it too noisy, well more like a "drone" (funny, coz that's the only silencer on a V8) so a "Cherry Bomb" was dropped in in front of it.
Out of shot but in front of that is a home made Y piece to bring the shortened hockey sticks together.

Edited by phillpot on Tuesday 22 April 21:16

Like the chop saw Mike. You a heating engineer by chance?